Home

Last Updated: 01/12/2006
Time span: 2003-2005, Sort by: Latest date
　
  1. Strengthening of a fully lamellar TiAl plus W alloy by dynamic precipitation of beta phase during long-term creep
    [Scripta Materialia, 54(3), (2006), 425-430]
    Hanliang Zhu, Dongyi Seo, Kouichi Maruyama and Peter Au

  2. Superplasticity and superplastic diffusion bonding of a fine-grained TiAl alloy
    [Materials Transactions, 46(10), (2005), 2150-2155]
    Hanliang Zhu, Bing Zhao, Zhiqiang Li and Kouichi Maruyama

  3. Interfacial strengthening of beta phase in a fully lamellar structure of TiAl alloy containing W
    [Philosophical Magazine Letters, 85(7), (2005), 377-385]
    Hanliang Zhu, Dongyi Seo, Kouichi Maruyama and Peter Au

  4. Newly developed heat resistant magnesium alloy by Thixomolding (R)
    [Materials Science Forum, 488-489, (2005), 287-290]
    T. Tsukeda, K. Saito, M. Suzuki, J. Koike and K. Maruyama

  5. Effects of alpha2 spacing on creep deformation characteristics of hard oriented PST crystals of TiAl alloy
    [Intermetallics, 13(10), (2005), 1116-1121]
    K. Maruyama, T. Nonaka and H.Y. Kim

  6. Effect of heating rate in a alpha+gamma dual-phase field on lamellar microstructure and creep resistance of a TiAl alloy
    [Zeitschrift fur Metallkunde, 96(6), (2005), 584-588]
    Kouichi Maruyama, Jun Matsuda and Hanliang Zhu

  7. Vacancy clustering and relaxation behavior in rapidly solidified B2 FeAl ribbons
    [Acta Materialia, 53, (2005), 3751-3764]
    T. Haraguchi, K. Yoshimi, M.H. Yoo, H. Kato, S. Hanada and A. Inoue

  8. Influence of heating rate in alpha plus gamma dual phase field on lamellar morphology and creep property of fully lamellar Ti-48Al alloy
    [Materials Science and Engineering A, 397(1-2), (2005), 58-64]
    Hanliang Zhu, Jun Matsuda and Kouichi Maruyama

  9. Microstructural stability of fine-grained fully lamellar XD TiAl alloys by step aging
    [Metallurgical and Materials Transactions, 36A(5), (2005), 1339-1351]
    Hanliang Zhu, Dongyi Seo, Kouichi Maruyama and Peter Au

  10. Effect of heat treatment on microstructure and mechanical property of 46XD and 47XD TiAl alloys
    [Materials Science Forum, 475-479, (2005), 581-584]
    Hanliang Zhu, Dongyi Seo and Kouichi Maruyama

  11. Substructure development in rapidly solidified B2-type TiCo ribbons
    [Materials Science Forum, 475-479, (2005), 849-852]
    Kyosuke Yoshimi, Minseok Sung, Sadahiro Tsurekawa, Akira Yamauchi, Ryusuke Nakamura, Shuji Hanada, Koichi Kawahara and Tadao Watanabe

  12. Microstructural evolution of a heat-resistant magnesium alloy due to friction stir welding
    [Scripta Materialia, 52(9), (2005), 899-903]
    Datong Zhang, Mayumi Suzuki and Kouichi Maruyama

  13. Surface mesostructure change of B2-type FeAl single crystals by condensation of supersaturated thermal vacancies
    [Philosophical Magazine, 85(2-3), (2005), 331-344]
    Kyosuke Yoshimi, Takayuki Kobayashi, Akira Yamauchi, Tomohide Haraguchi, Shuji Hanada

  14. Grain boundary morphology and its effect on creep of TiAl alloys
    [Materials Transactions, 45(12), (2004), 3343-3348]
    Hanliang Zhu, Dongyi Seo, Kouichi Maruyama and Peter Au

  15. Effects of zinc on creep strength and deformation substructures in Mg-Y alloy
    [Materials Science and Engineering A, 387-389, (2004), 706-709]
    Mayumi Suzuki, Tsuyoshi Kimura, Junichi Koike and Kouichi Maruyama

  16. Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries
    [Materials Science and Engineering A, 387-389, (2004), 910-917]
    Kouichi Maruyama, Hee Y. Kim and Hanliang Zhu

  17. Effect of microstructural stability on creep behavior of 47XD TiAl alloys with fine-grained fully lamellar structure
    [Scripta Materialia, 52(1), (2005), 45-50]
    Hanliang Zhu, D.Y. Seo, K. Maruyama and P. Au

  18. Effects of lamellar boundary structural change on lamellar size hardening in TiAl alloy
    [Acta Materialia, 52(17), (2004), 5185-5194]
    K. Maruyama, M. Yamaguchi, G. Suzuki, Hanliang Zhu, Hee Y. Kim and M.H. Yoo

  19. Microstructure and orientation distribution of aragonite crystals in nacreous layer of pearl shells
    [Materials Transactions, 45(4), (2004), 999-1004]
    K. Yoshimi, M. Shoji, T. Ogawa, A. Yamauchi, T. Naganuma, K. Muramoto and S. Hanada

  20. Microstructural Characteristics and Creep Behavior of 45XD TiAl Alloys
    [Materials Transactions, 45(8), (2004), 2618-2621]
    Hanliang Zhu, D.Y. Seo and K. Maruyama

  21. Correlation between Premature Failure and Laves Phase Growth in 9Cr-1.8W-0.5Mo-VNb Steel
    [Proceedings of International Conference on Advanced Structural Steels, (2004), 838-841]
    J.S. Lee and K. Maruyama

  22. Microstructural Characterization of Type IV Failure in Weldment of a Mod.9Cr-1Mo Steel
    [Proceedings of Failure 2004, (2004), in press]
    J.S. Lee, K. Maruyama, I. Nonaka and T. Ito

  23. Texture Dependence of Elongation Anisotropy in an AZ61 Magnesium Alloy Sheet
    [Journal of the Japan Institute of Metals, 68(1), (2004), 27-33]
    R. Ohyama, J. Koike, M. Suzuki and K. Maruyama

  24. Stress relaxation during isothermal annealing at elevated temperature in electroplated Cu films
    [MRS Proceeding, in press, (2004)]
    S.J. Hwang, Y-C. Joo and J. Koike

  25. Magnesium research trend in Japan
    [Materials Science Forum, 419-422, (2003), 21-34]
    S. Kamado, J. Koike, K. Kondoh and Y. Kawamura

  26. Texture development of AZ31 magnesium alloys during ECAE processing
    [Materials Science Forum, 419-422, (2003), 533-538.]
    Y. Yoshida, L. Cisar, S. Kamado, J. Koike and Y. Kojima

  27. New deformation mechanisms in fine-grain Mg alloys
    [Materials Science Forum, 419-422, (2003), 189-194]
    J. Koike

  28. Hall-Petch Parameters for tension and compression in cast Mg
    [Materials Science Forum, 419-422, (2003), 123-128]
    P. Anderson, C. H. Caceres and J. Koike

  29. Cavity Formation Mechanism in HAZ of a Welded Mod.9Cr-1Mo Steel
    [JSPS Report of the 123rd Committee on Heat-Resisting Materials and Alloys, 44(3), (2003), 249-254]
    J.S. Lee, K. Maruyama, I. Nonaka and T. Ito

  30. Microstructural Stability during Creep Deformation of Hard-oriented Polysynthetically Twinned Crystal of TiAl Alloy
    [Metallurgical and Materials Transactions, 30A (10), (2003), 2191-2198]
    H.Y. Kim and K. Maruyama

  31. Creep [, (2003), 178-186] K. Maruyama

  32. Effects of alpha2 Spacing on Creep Deformation Behavior of Hard Oriented PST Crystals of a Lamellar TiAl Alloy
    [Materials Science Forum, 426-432, (2003), 1751-1756]
    K. Maruyama, T. Nonaka, J. Matsuda and H. Y. Kim

  33. Microstructural influences on stress migration in electroplated Cu metallization
    [Applied Physics Letters, 83(10), (2003), 1962-1964]
    A. Sekiguchi, J. Koike, and K. Maruyama

  34. Creep Behavior and Deformation Substructure of Mg-Y Alloys Containing Dilute Content of Zinc
    [Materials Science Forum, 426-432, (2003), 593-598]
    M. Suzuki, T. Kimura, J. Koike and K. Maruyama

  35. Thermal Stability of Lamellar Structure of PST Crystals and Lamellar Boundary Design for Creep Resistant TiAl Alloy
    [Metals and Material International, 9(3), (2003), 255-263]
    H.Y. Kim, J. Matsuda and K. Maruyama

  36. Stability of lamellar microstructure of hard oriented PST crystal of TiAl alloy
    [Acta Materialia, 51(8), (2003), 2191-2204]
    H.Y. Kim and K. Maruyama

  37. Grain-Boundary Sliding in AZ31 Magnesium Alloys at Room Temperature to 523 K
    [Materials Transactions, 44(4), (2003), 445-451]
    J. Koike, R. Ohyama, T. Kobayashi, M. Suzuki and K. Maruyama

  38. Effects of Inhomogeneous Strain on Room-Temperature Recrystallization in Copper Thin Films
    [Journal of the Japan Institute of Metals, 67(4), (2003), 169-172]
    M. Wada, J. Koike and K. Maruyama

  39. Grain Size Dependence of Active Slip Systems in an AZ31 Magnesium Alloy
    [Journal of the Japan Institute of Metals, 67(4), (2003), 149-152]
    T. Kobayashi, J. Koike, Y. Yoshida, S. Kamado, M. Suzuki, K. Maruyama and Y. Kojima

  40. The Activity of Non-basal Slip Systems and Dynamic Recovery at Room Temperature in Fine-grained AZ31B Magnesium Alloys
    [Acta Materialia, 51(7), (2003), 2055-2065]
    J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama and K. Higashi

  41. Strengthening Effect of Zn in Heat Resistant Mg-Y-Zn Solid Solution Alloys
    [Scripta Materialia, 48(8), (2003), 997-1002]
    M. Suzuki, T. Kimura, J. Koike and K. Maruyama

  42. Change in Lamellar Boundary Structure and Saturation of Yield Stress in Nano Lamellar TiAl Alloy
    [Electron Microscopy: Its Role in Materials Science, (2003), 125-132]
    K. Maruyama, G. Suzuki and H.Y. Kim

  43. Effects of Zinc on Creep Behavior and Deformation Substructures of Mg-Y Alloy
    [Materials Science Forum, 419-422, (2003), 473-478]
    M. Suzuki, T. Kimura, J. Koike and K. Maruyama

  44. Newly Developed Heat Resistant Magnesium Alloy by Thixomolding
    [Materials Science Forum, 419-422, (2003), 439-444]
    T. Tsukeda, R. Uchida, M. Suzuki, J. Koike and K. Maruyama

  45. Enhance Grain-Boundary sliding at Room Temperature in AZ31 Magnesium Alloy
    [Materials Science Forum, 419-422, (2003), 237-242]
    R. Ohyama, J. Koike, T. Kobayashi, M. Suzuki and K. Maruyama

  46. Anomalous activity of Nonbasal Dislocations in AZ31 Mg Alloys at Room Temperature
    [Materials Science Forum, 419-422, (2003), 231-236]
    T. Kobayashi, J. Koike, T. Mukai, M. Suzuki, H. Watanabe, K. Maruyama and K. Higashi

| Home | Introduction | Papers | Members | Information | Links |

LABORATORY of Structural Materials for Eco-friendly Systems / Tohoku Univ.