トップページへ/TOP メンバー/MEMBER 研究内容/RESEARCH 業績/PUBLICATION アクセス/ACCESS リンク/LINK 学生の方へ/FOR_STUDENT

TOP › 業績 › 葛西 栄輝

学術雑誌掲載論文および審査のある国際会議報告
  1. 焼結鉱製造における２層ペレット法適用の基礎的検討
    葛西栄輝，許　彦斌，小林三郎，大森康男：鉄と鋼，70(1984), 520-526
  2. A Mathematical Model of Sintering Process Considering Melt-formation and Solidification Phenomena
    Eiki Kasai, Jun-ichiro Yagi and Yasuo Omori：Ironmaking Proceedings, ISS, AIME, Chicago, USA, 43(1984), 241-249
  3. A New Method for Measuring Apparent Volume of Iron Ore Pellets in Conjunction with Determination of the Swelling Index
    Yasuo Omori and Eiki Kasai：Trans. ISIJ, 24(1984), 751-753
  4. 層空間率，見掛けの粒子径変化が圧損に与える影響を考慮した焼結プロセスの数学的モデル
    葛西栄輝，八木順一郎，大森康男：鉄と鋼，70(1984), 1567-1574
  5. Analysis of Assimilation Zone of Sintering Process by Using a Simulator
    Eiki Kasai, Jun-ichiro Yagi and Yasuo Omori：Proc. of 4th Int. Symp. Agglomer., Toronto, Canada, (1985), 777-785
  6. アルミナを擬似鉱石とした賦存状態の異なるコ−クスの充填層内燃焼速度
    葛西栄輝，大森康男：鉄と鋼，72(1986), 1537-1544
  7. Coke Combustion Rate and Transport Phenomena at the Combustion and Assimilation Zones in the Course of Sintering
    Eiki Kasai, Yasuo Omori, Hirobumi Taketomi and Jun-ichiro Yagi：Proc. 6th Process Tech. Conf., ISS, AIME, Washington, USA, 6(1986), 555-561
  8. Coalescing Phenomenon of Granules in Iron Ore Sintering Bed
    Eiki Kasai, Yasuo Omori and Shengli Wu：Proc. 5th Int. Symp. Agglomer., ICHEME, Rugby, U.K., (1989), 71-81
  9. 鉄鉱石焼結ケ−キ中の空隙の構造解析
    葛西栄輝，Roy R. Lovel，William J. Rankin，大森康男：鉄と鋼，75(1989), 228-234
  10. The Effect of Raw Mixture Properties on Bed Permeability during Sintering
    Eiki Kasai, William J. Rankin and John F. Gannon：ISIJ International, 29(1989), 33-42
  11. Effect of the Constitution of Granules on Coalescing Phenomenon and Strength after Sintering
    Shengli Wu, Eiki Kasai and Yasuo Omori：IISC, 6(1989), Vol.2, 15-22
  12. An Analysis of the Structure of Iron Ore Sinter Cake
    Eiki Kasai, William J. Rankin, Roy R. Lovel and Yasuo Omori：ISIJ International, 29(1990), 635-641
  13. ４成分系カルシウムフェライト組成の外殻粉層を有するミニペレットを原料とした焼結鉱の品質
    大友崇穂，田口　昇，葛西栄輝，大森康男：鉄と鋼，76(1990), 683-690
  14. Factors Governing the Strength of Agglomerated Granules after Sintering
    Eiki Kasai, Shengli Wu and Yasuo Omori：ISIJ International, 30(1991), 17-23
  15. 擬似粒子の合体現象に与える鉄鉱石性状の影響
    葛西栄輝，呉勝利，大森康男：鉄と鋼，77(1991), 56-62
  16. Permeation Characteristics and Void Structure of Iron Ore Sinter Cake
    Eiki Kasai, Yasuo Omori, Batmunhiin Batcaihan，Noboru Sakamoto and Akira Kumasaka：ISIJ International，31(1991), 1286-1291
  17. Effect of Mixed Grinding of Kaolin-Gibbsite Mixture on Formation Mullite
    Hojin Ryu, Eiki Kasai and Fumio Saito：資源と素材 (MMIJ)，108(1992), 221-226
  18. Rapid Determination of Concentration of Nitrogen Oxides in Combustion Gas by Using FT-IR
    Eiki Kasai, Makoto Sakata, Osamu Yoshikawa and Yasuo Omori: ISIJ International, 32(1992), 1381-1383
  19. 充填層内におけるコークス擬似粒子の燃焼速度およびＮＯ発生挙動
    葛西栄輝，呉　勝利，杉山　健，稲葉晋一，大森康男：鉄と鋼，78(1992), 1005-1012
  20. Effect of Dry Grinding of Powder Mixtures in a Planetary Ball Mill on Preparation of YBa2CU3Ox Superconducting Ceramics
    Hojin Ryu, Eiki Kasai, Kazumasa Sugiyama and Fumio Saito: Proc. 1st Int. Conf. Mechanochemistry, Vol.2, Kosice, (1993), 73-76
  21. Emission of Nitric Monoxide during Combustion of Coke Granules in Packed Bed
    Eiki Kasai, Shengli Wu, Takeshi Sugiyama, Yasuo Omori and Shinichi Inaba: Proc.3rd Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Elsevier, New York, (1993), 1065-1072
  22. ピソライト鉱石を原料とした焼結鉱の同化部分に存在する粗大気孔の生成機構
    大友崇穂，田口　昇，葛西栄輝，大森康夫，川口尊三：鉄と鋼，79(1993), 1145-1150
  23. Effects of Moisture on Grinding of Natural Calcite by a tumbling Ball Mill
    Armando H. Shinohara, Kazumasa Sugiyama, Eiki Kasai, Fumio Saito and Yoshio Waseda: Advanced Powder Technol., 4(1993), 311-319
  24. Effect of Dry Mixed Grinding of Talc, Kaolinite and Gibbsite on Preparation of Cordierite Ceramics
    James M. Filio, Kazumasa Sugiyama, Eiki Kasai and Fumio Saito: J. Chem. Eng. Japan, 26(1993), 565-569
  25. Effect of Mixed Grinding of Powders on Superconducting Properties of YBa2Cu3O7-y Ceramics
    Hojin Ryu, Kazumasa Sugiyama, Eiki Kasai, Daisuke Shindo and Fumio Saito: J. Chem. Engineering Japan, 26(1993), 627-632
  26. Removal of Iron Minerals from Bauxite Ore by HGMS
    Eiki Kasai, Manuse Maneenuse, Mitsuo Tanjo and Fumio Saito: 資源と素材 (MMIJ), 109(1993), 817-822
  27. 粉砕に伴う合成モルデナイトのメカノケミカル変化 -陽イオン吸着特性変化について-
    葛西栄輝，三村　均，杉山和正，齋藤文良，秋葉健一，早稲田嘉夫: 粉体工学会誌, 30(1993), 635-640
  28. Formation of Mullite from Ground Product of Kaolinite-Aluminum Trihydroxide Mixture by Solid Phase Reaction
    Hojin Ryu, Eiki Kasai, Kazumasa Sugiyama, Fumio Saito, Yoshio Waseda and Hiromichi Ohta: Particulate Science and Technology, 11(1993), 157-164
  29. Emission of Nitrous Oxide and other Nitrogen Oxides from Iron Ore Sintering Process
    Eiki Kasai, Makoto Sakata, Yasuo Omori, Takeshi Sugiyama, Osamu Yoshikawa and Shinichi Inaba: Proc. 6th Int. Symp. Agglomer., Nagoya, Japan, (1993), 375-379
  30. Mechanism of the Formation of the Layer Accompanying Large Pores in the Assimilated Part of Sinter Produced Using Pisolitic Ores
    Takaho Otomo, Noboru Taguchi, Eiki Kasai, Yasuo Omori and Takazo Kawaguchi: Proc. 6th Int. Symp. Agglomer., Nagoya, Japan, (1993), 243-248
  31. 石炭と鉄鉱石混合粉により作成したコークスの使用による焼結過程における窒素酸化物発生量の低減
    葛西栄輝，杉山　健，大森康男: 鉄と鋼，80(1994), 282-287
  32. Mechano-chemical Changes in Natural and Synthetic Zeolites by Dry Grinding Using a Planetary Ball Mill
    Eiki Kasai, Hitoshi Mimura, Kazumasa Sugiyama, Fumio Saito, Kenichi Akiba and Yoshio Waseda: Advanced Powder Technol., 5(1994), 189-203
  33. Effect of Water Content on Grindability of Dolomite and its Structural Change
    Daisuke Itabashi, Kazumasa Sugiyama, Eiki Kasai and Fumio Saito: J. Chem. Eng.Japan, 27(1994), 279-283
  34. コークスの燃焼によって発生するＮＯガスの鉄鉱石焼結ベッド内除去反応
    呉　勝利，杉山　健，森岡耕一，葛西栄輝，大森康男: 鉄と鋼，80(1994), 276-281
  35. Effects of Dry Grinding on Ion-exchange Characteristics of Synthetic Mordenite
    Qiwu Zhang, Eiki Kasai, Hitoshi Mimura and Fumio Saito: Advanced Powder Technol., 5(1994), 289-296
  36. Grinding of EP Dust and its Effect on Solubility of Metal Compounds in Water
    James M. Filio Hun S. Chung, Eiki Kasai, Yoshiaki Umetsu and Fumio Saito: J. Chem. Eng. Japan, 27(1994), 492-497
  37. Suppression of Nitrogen Oxides Formation from Iron Ore Sintering Process Using Iron-bearing Coke
    Eiki Kasai, Takeshi Sugiyama and Yasuo Omori: Proc. 1st Int. Congr. Science and Technol. Ironmaking, Sendai, Japan, (1994), 665-670
  38. 鉄鉱石焼結プロセスにおける炭材燃料構造の最適化による窒素酸化物の低減
    葛西栄輝，齋藤文良: 化学工学論文集, 20(1994), 857-864
  39. Effect of Mixed-Grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
    Eiki Kasai, Katsuhito Mae and Fumio Saito: ISIJ International, 35(1995), 1444-1451
  40. Mechanochemical changes in gypsum when dry ground with hydrated minerals
    Qiwu Zang, Eiki Kasai and Fumio Saito: Powder Technol., 87(1996), 67-71
  41. Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
    Eiki Kasai and Fumio Saito: ISIJ International, 36(1996), 1109-1111
  42. Suppression of the Formation of Large Pores in the Assimilated Parts of Sinter Produced Using Pisolitic Ores
    Takaho Otomo, Noboru Taguchi and Eiki Kasai: ISIJ International 36(1996), 1338-1343
  43. Mixed-Grinding of Coal and Iron Ores and Reduction Behavior of Their Composites
    Eiki Kasai, Maximiano V. Ramos and Fumio Saito: Proc. 5th World Congress of Chemical Engineering, Vol.5, (1996), 202-207
  44. TiCl4のマグネシウム還元における導電体を介した反応（EMR）の実証
    宇田哲也，岡部　徹，葛西栄輝，早稲田嘉夫：日本金属学会誌，61(1997), 602-609
  45. 導電体を介した反応（EMR）を含むTiCL4のマグネシウムおよびナトリウム還元における相平衡および反応経路
    岡部　徹，宇田哲也，葛西栄輝，早稲田嘉夫：日本金属学会誌，61(1997), 610-618
  46. Catalytic Performance of Several Metallic Oxides on the Elimination Reaction of Nitrogen Oxide
    Eiki Kasai, Chunbao Xu, Shengli Wu and Daqiang Cang: 素材物性学雑誌, 10(1997), 62-69
  47. 熱分析による鉄鉱石焼結反応の解析
    葛西栄輝，早稲田嘉夫，Maximiano V. Ramos：鉄と鋼，83(1997), 539-544
  48. Reaction Pathways during Metallothermic Reduction of TiCl4 by Using Chemical Potential Diagrams
    Toru H. Okabe, Tetsuya Uda, Eiki Kasai and Yoshio Waseda: Proc. Titanium Extraction and Processing, Ed. by B. Mishra and G. J. Kipourous, The Minerals, Metals & Materials Soc., (1997), 133-151
  49. Mechanism of Magnesiothermic Reduction of TiCl4 by an Electronically Mediated Reaction (EMR)
    Toru H. Okabe, Tetsuya Uda, Eiki Kasai and Yoshio Waseda: Proc. Titanium Extraction and Processing, Ed. by B. Mishra and G. J. Kipourous, The Minerals, Metals & Materials Soc., (1997), 243-258
  50. Rate of Methane-Steam Reforming Reaction on the Surface of Molten BF Slag −for Heat Recovery from Molten Slag by Using a Chemical Reaction−
    Eiki Kasai, Takaya Kitajima, Tomohiro Akiyama, Junichiro Yagi and Fumio Saito: ISIJ International, 37(1997), 1031-1036
  51. Essential Factors Governing the Strength between Particles in the Iron Ore Sintering Process
    Eiki Kasai, Takaho Otomo, Maximiano V. Ramos and Yoshio Waseda: ICSTI/Ironmaking Conference Proceedings, ISS, AIME, (1998), 115-122
  52. Simulation Model for Agglomeratiom Process of Granules During Iron Ore Sintering by Discrete Element Method
    Eiki Kasai, Maximiano V. Ramos, Junya Kano, Fumio Saito and Yoshio Waseda: Proc. World Congress of Particle Technology 3, Brighton, UK, (1998), No.89, 1-10
  53. Thermodynamic Properties of Oxygen in RE-O (RE = Gd, Tb, Dy, Er) Solid Solutions
    Toru H. Okabe, Hiroyuki Hirota, Eiki Kasai, Fumio Saito, Yoshio Waseda and K. T. Jacob: J. Alloys & Compounds, 279(1998), 184-191
  54. Effect of Raw Materials Bed Segregation on the Structural Change of Iron Ore Sintering Bed
    Eiki Kasai and Maximiano V. Ramos: ISIJ International, 39(1999), 396-398
  55. Carbothermic Reduction of Bauxite Residue
    Takaya Kitajima and Eiki Kasai: 資源と素材 (MMIJ), 115(1999), 611-617
  56. Formation of PCDD/Fs on Iron Oxides from Chlorobenzene and Chlorophenol
    Eiki Kasai, Takehiro Kobayashi and Takashi Nakamura: Organohalogen Compounds, 41(1999), 187-190
  57. Utilization of Limestone Concrete Waste as Fluxing Materials of Iron Ore Sintering Process
    Kiyoshi Shibata and Eiki Kasai: Trans. Mater. Res. Soc. Japan (MRS-J), 24(1999), 353-356
  58. Thermodynamic Analysis on the Thermochemical Recovery of High Temperature Wastes
    Tomohiro Akiyama, Koichi Oikawa, Taihei Shimada, Eiki Kasai and Jun-ichiro Yagi: ISIJ International, 40(2000), 286-291
  59. 焼結過程における生成融液の流動に対する鉄鉱石種の影響
    葛西栄輝, 坂野頼人, 中村　崇: 鉄と鋼, 86(2000), 139-145
  60. Thermal Remediation of PCDD/Fs Contaminated Soil by Zone Combustion Process
    Eiki Kasai, Sri Harjanto, Toshikatsu Terui, Takashi Nakamura and Yoshio Waseda: Chemosphere, 41(2000), 857-864
  61. Numerical Simulation Model of the Iron Ore Sintering Process Directly Describing the Agglomeration Phenomenon of Granules in the Packed Bed
    Maximiano V. Ramos, Eiki Kasai, Junya Kano and Takashi Narkamura: ISIJ International, 40(2000), 448-454
  62. Determination of Heat Capacity of Dibenzo-p-dioxin by Modulated DSC (Differential Scanning Calorimetory)
    Etsuro Shibata, Satoru Yamamoto, Eiki Kasai, Takashi Nakamura, Hirotaka Koyo and Masafumi Maeda: Proc. Inter. Conf. Steel and Society (ICSS 2000), ISIJ, (2000), 158-161
  63. Macroscopic Behavior of Dioxins in the Sintering Process of Iron Ores
    Eiki Kasai, Teruhiko Aono, Norihisa Siraishi and Haruo Kokubu: Organohalogen Compounds, 46(2000), 70-73
  64. PCDD/Fs Formation from Mono-chlorobenzene on Some Metallic Oxides
    Eiki Kasai, Takehiro Kobayashi and Takashi Nakamura: Organohalogen Compounds, 46(2000), 142-145
  65. Behavior of PCDD/Fs formed during heat treatment of PVC and Copper Oxide
    Etsuro Shibata, Satoru Yamamoto, Eiki Kasai and Takashi Nakamura: Organohalogen Compounds, 46(2000), 221-224
  66. Carbothermic Reduction in the Combustion Bed Packed with Composite Pellets of iron Oxide and Coal
    Eiki Kasai and Takaya Kitajima and Takazo Kawaguchi: ISIJ International, 40(2000), 842-849
  67. Influence of Properties of Fluxing Materials on the Flow of Melt Formed in the Sintering Process
    Eiki Kasai, Yorito Sakano, Takazo Kawaguchi and Takashi Nakamura: ISIJ International, 40(2000), 857-862
  68. Carbothermic Reduction of Iron Oxide and Coal Composite in Packed Bed Combustion Process
    Eiki Kasai and Takaya Kitajima, Tokazo Kawaguchi and Takashi Nakamura: Proc. MINPREX 2000 Congress, (2000), 499-507
  69. Observation of Molten Slag Surface under Gas Impingement by X-ray CT
    Taihei Shimada, Tomohiro Akiyama, Eiki Kasai and Jun-ichiro Yagi: ISIJ International, 40(2000), 958-963
  70. Heat and Material Recovery from Molten Slag by Using Chemical Reaction
    Taihei Shimada, Tomohiro Akiyama, Eiki Kasai and Jun-ichiro Yagi: Proc. Asia Steel Int. Conf. 2000 (ASIA STEEL’2000) - Vol.B, Beijing, China, Sept. 26-29 (2000), 157-164
  71. Macroscopic Behaviors of Dioxins in the Iron Ore Sintering Plants
    Eiki Kasai, Teruhiko Aono, Yukio Tomita, Makoto Takasaki, Norihisa Shiraishi and Shinji Kitano: ISIJ International, 41(2001), 86-92
  72. Effect of Additives on the PCDD/Fs Emissions in the Iron Ore Sintering Process
    Eiki Kasai, Yozo Hosotani, Takazo Kawaguchi, Koichi Nushiro and Teruhiko Aono: ISIJ International, 41(2001), 93-97
  73. Effects of Slag Compositions on the Rate of Methane-Steam Reaction
    Taihei Shimada, Vladimir Kochura, Tomohiro Akiyama, Eiki Kasai and Jun-ichiro Yagi: ISIJ International, 41(2001), 111-115
  74. Effect of the Kinds of Chlorine Source and Solid Fuel in the Raw Materials on the Emissions of Dioxins from the Sintering Process of Iron Ores
    Eiki Kasai, Takazo Kawaguchi, Teruhiko Aono, Yozo Hosotani, Yukio Tomita and Hidetoshi Noda: Proc. of 6th International Conference on Technologies and Combustion for a Clean Environment, Vol.1, (2001), Porto, Portugal, 245-250
  75. Effect of Oxygen on Behavior of PCDD/Fs Formed during Heat Treatment of PVC and Copper Oxide Mixture
    Etsuro Shibata, Satoru Yamamoto, Eiki Kasai and Takashi Nakamura: Organohalogen Compounds, 50(2001), 418-421
  76. Formation of PCDD/Fs from the Composite of Graphite and Chloride
    Shunsuke Kuzuhara, Eiki Kasai, Takashi Nakamura and Etsuro Shibata: Organohalogen Compounds, 50(2001), 422-425
  77. Formation of Dioxins from Raw Sintering Mixture Heated in a Packed Bed Reactor
    Katsuya Kawamoto, Eiki Kasai, Teruhiko Aono and Kazuyuki Suzuki: Organohalogen Compounds, 50(2001), 426-429
  78. Feasibility of Rotary Cup Atomizer for Slag Granulation
    Mizuochi Toshio, Tomohiro Akiyama, Taihei Shimada, Eiki Kasai and Jun-ichiro Yagi: ISIJ International, 41(2001), 1423-1429
  79. Measurement of Thermodynamic Functions of Solid Phase for DD, DF, OCDD and OCDF, and Estimation of Thermodynamic Functions of Gas Phase for PCDD / Fs Using Molecular Orbital Method with Density Functional Theory
    Etsuro Shibata, Satoru Yamamoto, Hirotaka Koyo, Takashi Ikeda, Eiki Kasai, Masafumi Maeda and Takashi Nakamura: Materials Transactions, 42(2001), 2531-2536
  80. 焼結過程における微量塩素の層内挙動および排ガスダイオキシン類濃度に及ぼす影響
    川口尊三, 松村　勝, 細谷陽三, 葛西栄輝: 鉄と鋼, 88(2002), 59-65
  81. Dioxin Emissions from Metallurgical Processes and their Reduction
    Eiki Kasai: Proc. of Green Processing 2002, Australia, (2002), 343-350
  82. The Influence of the Composite State of Graphite and Metallic Chlorine Compounds on the Formation of PCDD/Fs
    Shunsuke Kuzuhara, Eiki Kasai, Takashi Nakamura and Etsuro Shibata: Proc. of Green Processing 2002, Australia, (2002), 351-359
  83. Formation of Dioxins in the Sintering Process of Iron Ores and Suppression of its Emission
    Eiki Kasai, Takazo Kawaguchi and Teruhiko Aono: Recycling and Waste Treatmrnt in Mineral and Metal Processing: Technological and Economic Aspects, Vol. 2, TMS, Lulea, (2002), 713-722
  84. A New Process for Thermal Remediation of Soils Contaminated by Hazardous Organic Compounds
    Sri Harjanto, Eiki Kasai, Toshikatsu Terui and Takashi Nakamura: Recycling and Waste Treatmrnt in Mineral and Metal Processing: Technological and Economic Aspects, Vol. 2, TMS, Lulea, (2002), 723-733
  85. 焼結プロセスにおけるダイオキシン類生成の促進物質および抑制物質
    川口尊三, 松村　勝, 葛西栄輝, 大塚康夫, 野田英俊: 鉄と鋼, 88(2002), 370-377
  86. 焼結プロセスにおける燃料性状の排ガスダイオキシン類濃度に及ぼす影響
    川口尊三, 松村　勝, 葛西栄輝, 野田英俊: 鉄と鋼, 88(2002), 378-385
  87. Behavior of Dioxins during Thermal Remediation in the Zone Combustion Process
    Sri Harjanto, Eiki Kasai, Toshikatsu Terui and Takashi Nakamura: Chemosphere, 47(2002), 687-693
  88. Formation and Transport of PCDD/Fs in the Packed Bed of Soil Containing Organic Chloride During a Thermal Remediation Process
    Sri Harjanto, Eiki Kasai, Toshikatsu Terui and Takashi Nakamura: Chemosphere, 49(2002), 217-224
  89. Vapour Pressure Determination for Dibenzo-p-dioxin, Dibenzofuran, Octachlorodibenzo-p-dioxin and Octachlorodibenzofuran using a Knudsen Effusion Method
    Li Xang Wei, Etsuro Shibata, Eiki Kasai and Takashi Nakamura, Materaials Transactions JIM, 43(11), (2002), 2903-2907
  90. Formation Behavior of PCDD/Fs in PVC Pyrolysis with Copper Oxide
    Etsuro Shibata, Satoru Yamamoto, Eiki Kasai and Takashi Nakamura: Chemosphere, 50(2003), 1235-1242
  91. Influence of Metallic Chlorides on the Formation of PCDD/Fs During Low Temperature Oxidation of Carbon
    Shunsuke Kuzuhara, Hiroshi Sato, Eiki Kasai and Takashi Nakamura: Environmental Science & Technology, 37(2003), 2431-2435
  92. Rates of Carbon Oxidation and Chlorinated Organic Compound Formation from Mixture of Carbonaceous Materials and Metallic Chlorides at Low Temperature
    Shunsuke Kuzuhara, Hirioshi Sato, Eiki Kasai and Takashi Nakamura: Organohalogen Compounds, 63(2003), 151-154
  93. Measurement of Vapourization Properties for Halogenated Organic Compounds Using Knudsen Effusion Method
    Xian-Wei Li, Etsuro Shibata, Eiki Kasai and Takashi Nakamura: Organohalogen Compounds, 63(2003), 345-348
  94. De novo Formation Characteristics of Dioxin in the Dry Zone of an Iron Ore Sintering Bed
    Kazumasa Suzuki, Eiki Kasai, Teruhiko Aono, Hitoshi Yamazaki and Katsuya Kawamoto: Chemosphere, 54(2004), 97-104
  95. Mechanism of Dioxin Formation in the Iron Ore Sintering Process and its Emission Control
    Eiki Kasai and Takashi Nakamura: BAAC ‘04, 1(2004), 82-88
  96. Effect of Urea on PCDD/Fs Formation through De Novo Synthesis
    Shunsuke Kuzuhara, Hirioshi Sato and Eiki Kasai: Organohalogen Compounds, 66(2004), 1056-1061
  97. Vapour Pressures and Enthalpies of Sublimation of 17 Polychlorinated Dibenzo-p-dioxins and 5 Polychlorinated Dibenzofurans
    Xian-Wei Li, Etsuro Shibata, Eiki Kasai and Takashi Nakamura: Environmental Toxicology and Chemistry, 23(2004), 348-358
  98. 鉄鋼および化学産業におけるフッ素のマテリアルフロー
    藤岡義彰，柴田悦郎，葛西栄輝，中村　崇: 鉄と鋼，91(2005), 199-205
  99. Effect of Nitrogen-containing Compounds on PCDD/Fs Formation through De Novo Synthesis
    Shunsuke Kuzuhara, Hiroshi Sato, Naoto Tsubouchi, Yasuo Otsuka and Eiki Kasai: Environmental Science & Technology, 39(2005), 795-799
  100. Numerical Simulation Model for Granulation Kinetics of Iron Ores
    Junya Kano, Eiki Kasai, Fumio Saito and Takazo Kawaguchi: ISIJ International, 45(2005), 500-505
  101. Design of Bed Structure Aiming the Control of Void Structure Formed in the Sinter Cake
    Eiki Kasai, Sergey Komarov, Koichi Nushiro and Masanori Nakano: ISIJ International, 45(2005), 538-543
  102. Observation of Behavior of Dioxins and Some Relating Elements in Iron Ore Sintering Bed by Quenching Pot Test
    Masanori Nakano, Yozo Hosotani and Eiki Kasai: ISIJ International, 45(2005), 609-617
  103. Simulation Model for Agglomeration of Iron Ores
    Junya Kano, Fumio Saito, Eiki Kasai and Takazo Kawaguchi: Proc. 8th International Symposium on Agglomeration, 8(2005), 361-368
  104. Vapor Pressure Measurements for Metal Chloride Systems by Knudsen Effusion Method
    Yanling Zhang, Etsuro Shibata, Eiki Kasai, Takashi Nakamura: Materials Transactions, 46(2005), 1348-1353
  105. 鉄鉱石の焼結プロセスで生成したダスト中の炭素と塩素の化学形態
    坪内直人，葛西栄輝，川本克也，野田英俊，中里嘉浩，大塚康夫: 鉄と鋼, 91(2005), 751-756
  106. Vaporization Behavior of Zinc from the FeO-CaO-SiO2-Al2O3 Slag System
    Yanling Zhang , Eiki Kasai, Takashi Nakamura: ISIJ international, 45(2005), 1813-1819
  107. Vapor Pressure of Zinc and Zinc Chloride in the FetO-CaO-SiO2-Al2O3 Slag System
    Yanling Zhang, Etsuro Shibata, Eiki Kasai and Takashi Nakamura: Materials Transactions, 47(2006), 1341-1346
  108. Properties of Dust Particles Sampled from Windboxes of an Iron Ore Sintering Plant: Surface Structures of Unburned Carbon
    Naoto Tsubouchi, Shunsuke Kuzuhara, Eiki Kasai, Hiroyuki Hashimoto and Yasuo Ohtsuka: ISIJ International, 46(2006), 1020-1026
  109. 焼結プロセスにおける焼成ガス雰囲気の排ガス ダイオキシン類濃度に及ぼす影響
    松村　勝，川口尊三，葛西栄輝: 鉄と鋼, 92(2006), 417-426
  110. 空気流通型充填層による炭材内装ペレットの熱炭素還元
    大友崇穂，高崎康志，柴山敦，川口尊三，葛西栄輝: 鉄と鋼, 92(2006), 809-814
  111. Improvement in Sonochemical Degradation of 4-Chrolophenol by Combined Use of Fenton-like Reagents
    Jun Liang, Sergey V. Komarov, Naohito Hayashi, Eiki Kasai: Ultrasonics Sonochemistry, 14(2007), 201-207
  112. Effect of Temperature on Deposition of LaPO4 Coatings Produced by Ultrasonic-based Coating Process on Steel Substrates
    Sergay Romankov, Sergay V. Komarov, Naohito Hayashi, S. Ueno, S. D. Kaloshkin and Eiki. Kasai: Surf. Coat. Technol., 202(2008), 4285-4290, pp. 4285-4290
  113. A Dry Ultrasonic-based Method for Mechanical Coating
    Sergey V.Komarov, San han son, D. Kaloshkin and Eiki Kasai: Rev. Adv. Mater. Sci., 18(2008), pp. 689-694
  114. Production of LaPO4 Coatings Using a Novel Ultrasonically -assisted Plating Technique
    Sergay V. Komarov, Sergay Romankov, Sang Han Son, Naohito Hayashi, S. D. Kaloshkin, S. Ueno, and Eiki Kasai: Surf. Coat. Technol., 202(2008), pp. 5180-5184
  115. Reduction in Dioxin Emissions by the Addition of Urea as Aqueous Solution to High-temperature Combustion Gas
    Eiki Kasai, Shunsuke Kuzuhara, Hiroshi Goto, and Taichi Murakami: ISIJ International, 48(2008), pp. 1305-1310
  116. Heat Transfer Analysis of the Mosaic Embedding Iron Ore Sintering (MEBIOS) Process
    Naohito Hayashi, Sergey V. Komarov and Eiki Kasai: ISIJ International, 49(2009), No. 5, pp. 681-686
  117. Effect of Process Parameters on the Formation of Ti-Al Coatings Fabricated by Mechanical Milling
    Sergay Romankov, S. D. Kaloshkin, Y. Hayasaka, Sergay V. Komarov, Naohito Hayashi, Eiki Kasai: Journal of Alloys and Compounds (2009), doi: 10.1016/j.jallcom.2009.05.016
  118. Analysis of Granules Behavior in Continuous Drum Mixer by DEM
    Rikio Soda, Akira Sato, Junya Kano, Eiki Kasai, Fumio Saito, Masaki Hara and Takazo Kawaguchi: ISIJ International, 49(2009), 5, pp. 645-649
  119. Reduction Behavior of Hematite Composite Containing Polyethylene and Graphite with Different Structures with Increasing Temperature
    Taichi Murakami, Takumi Akiyama and Eiki Kasai: ISIJ International, 49(2009), 6, pp. 809-814

ページのトップへ

分担執筆著書
  1. 魅力ある製鉄技術を求めて
    分担執筆: 日本鉄鋼協会編, (1993)
  2. Advanced Approach to intelligent Agglomeration −新たなる鉱石接合技術へのプロローグ−
    分担執筆: 日本鉄鋼協会編, (1999), 177-194
  3. 公害防止の技術と法規−ダイオキシン編
    分担執筆（および編集委員）: 公害防止の技術と法規編集委員会編，通商産業省環境立地局監修, 丸善，(2000), 107-116
  4. 酸化鉄の炭素還元の基礎と応用
    分担執筆（および編集委員）: 日本鉄鋼協会還元反応研究グループ，(2001), 13-18, 111-114
  5. リサイクルの百科事典
    分担執筆: 安井至　他編，丸善株式会社，東京，(2002)
  6. 鉄鋼便覧第4版（CD-ROM版）第8巻 第6編 鉄鋼と環境工学の動向（15. 3. 2）
    分担執筆: 日本鉄鋼協会，(2002)
  7. 入門　環境の科学と工学
    分担執筆（葛西栄輝，川本克也）: 共立出版，(2003年10月10日初刊)
  8. 物質・エネルギー再生の科学と工学
    分担執筆（葛西栄輝，秋山友宏）: 共立出版，(2006年2月25日初刊)
  9. サステナブル金属素材プロセス入門 ―循環型社会の構築のために―
    分担執筆（中村崇編，葛西栄輝他）: アグネ技術センター，(2009年4月30日初刊)

ページのトップへ

審査のない国際会議報告および研究所報告
  1. A New Sintering Process Using Double Layered 'Duplex' Mini-pellets
    Eiki Kasai, Inbin Shu, Saburo Kobayashi and Yasuo Omori: Japan-U.S. Symp., Kyoto, Japan, (1983), 159-169
  2. アルミナ充填層におけるコ−クスの燃焼反応速度
    葛西栄輝，武富洋文，大森康男：東北大学選研彙報，40(1984), 61-70
  3. 焼結過程におけるカルシウムフェライトの生成に及ぼす原料の賦存状態および雰囲気の影響
    大友崇穂，葛西栄輝，大森康男：東北大学選研彙報，42(1986), 53-62
  4. 焼結原料粒子充填層の高温における凝集・合体
    葛西栄輝，大森康男：東北大学選研彙報，42(1986)，81-90
  5. The Development of Void Structure in Iron Ore Sinter
    William J. Rankin, Eiki Kasai and John F. Gannon: Proc. 2nd Australia/China Symp. Tech. Feed Prepar. Ironmaking, Melbourne, (1989)
  6. Relation between Void Structure and Physical Properties of Iron Ore Sinter Cake
    Eiki Kasai and Yasuo Omori: Proc. 4th World Congr. Chem. Eng., (1991), Karlsruhe, FRG，p. 6.3.17-20
  7. Effect of Dry Grinding Using a Planetary Ball Mill on the Crystal Structure and Superconductivity in the YBa2Cu3Ox Ceramics
    Hojin Ryu, Eiki Kasai, Kazumasa Sugiyama and Fumio Saito: 4th Int. Symp. Advanc. Nucl. Energy Resear.，(1992)，Mito，Japan，p. 28
  8. Improvement of Mullite Formation by dry Grinding of Kaolinite-aluminum hydroxide Mixture Using a Planetary Milling
    Hojin Ryu, Eiki Kasai, Kazumasa Sugiyama and Fumio Saito: Proc. 4th Japan-Russia Symp. Mechanochemistry, (1992)，Nagoya，Japan，45-46
  9. Effects of Moisture on Size Reduction and Phase Transformation of Natural Calcite by a Tumbling Ball Mill
    Armando H. Shinohara, Kazumasa Sugiyama, Eiki Kasai, Fumio Saito and Yoshio Waseda: Proc. 24th Ann. Meeting Fine Particle Soc., (1993), 76-78
  10. Suppression of Nitrogen Oxides Emission from the Sintering Process of iron Ores by Optimizing the Structure of Coke Granules
    Eiki Kasai, Yasuo Omori, Makoto Sakata and Osamu Yoshikawa: Proc. 1st Int. Conf. Processing Materials for Properties, TMS, AIME, (1993), 121-124
  11. Effect of Dry Grinding of Mixture on Preparation of Cordierite Ceramics and their Dielectric Properties
    James M. Filio, Kazumasa Sugiyama, Eiki Kasai and Fumio Saito: Proc. 1st Int. Particle Technol. Forum, AIChE, (1994), 160-165
  12. Effect of Mechanochemical Treatment of Heavy Oil Soot on its Leaching Behavior of Metal Compounds in Water
    James M. Filio, Hun S. Chung, Eiki Kasai and Fumio Saito: Proc. MMIJ/AusIMM Joint Symposium '94, Ube, (1994), 193-199
  13. 産業におけるフッ素のマテリアルフロー
    柴田悦郎，葛西栄輝，中村　崇: 東北大学素材工学研究所彙報, 55(1999), 81-90
  14. 回転カップアトマイザーを用いた溶融スラグの微粒化
    嶋田太平，秋山友宏，葛西栄輝，八木順一郎: 東北大学素材工学研究所彙報, 56(2000), 92-97
  15. 酸化鉄の還元に対する燃焼充填層プロセス適用の試み
    葛西栄輝，中村　崇: 東北大学素材工学研究所彙報, 56(2000), 66-72
  16. Present Statement of Metal Recycling and Dioxin Problems
    Takashi Nakamura, Eiki Kasai and Etsuro Shibata: The 4th International Conference on Materials Engineering for Resources (ICMR2001), Akita, Japan, (2001)
  17. Direct Observation on Pyrolysis of Some Plastics
    Tomio Takasu, Hideyuki Itou, Etsuro Shibata Eiki Kasai and Takashi Nakamura: Proc. of the 6th International Symposium on East Asian Resources Recycling Technology, Gyongju, Korea, (2001), C2R3-05
  18. The Construction and Testing of a New Apparatus with Knudsen Effusion Method Designed for Low Vapor Pressure Measurements for POPs
    Xianwei Li, Etsuro Shibata, Eiki Kasai and Takashi Nakamura: Bull. Advanced Materials Processing, IMRAM, Tohoku University, 58(2002), 29-36
  19. Simulation Model for Agglomeration of Iron Ores
    Junya Kano, Fumio Saito, Eiki Kasai, Takazo Kawaguchi: Proc. 8th International Symposium on Agglomeration, Thailand, Bangkok, 8(2005), 361-368
  20. Dioxin Emissions and its Control in the Iron- and Steel-making Processes
    Eiki Kasai, Takazo Kawaguchi: Proc. of 7th Nordic countries-Japan Joint Symposium on Science and Technology of Process metallurgy, Sweden, Stockholm, 2201-2214 (September 15-16, 2005)
  21. Thermodynamic Approach to the Remove/recovery of Zinc and Lead from FeO-CaO-SiO2-Al2O3-Fe2O3 Slag System
    Yanling Zhang, Eiki Kasai and Takashi Nakamura: Resources Recycling Technology 2005 (Proc. 8th International Symposium on East Asian Resources Recycling Technology - EARTH 2005), November 8-10, Beijing, 8(2005), 440-443
  22. Sonochemical Decomposition of chlorinated Aromatic Hydrocarbons in Aqueous Solution
    Liang Jun, Naohito Hayashi, Sergey Komarov and Eiki Kasai: Resources Recycling Technology 2005 (Proc. 8th International Symposium on East Asian Resources Recycling Technology - EARTH 2005), November 8-10, Beijing, 8(2005), 497-500
  23. Thermodynamic Predictions on the Vaporization Behavior of Zn/Pb from FeO-CaO-SiO2-Al2O3 Slag System
    Yanling Zhang, Eiki Kasai and Takashi Nakamura: Bull. Advanced Materials Processing, IMRAM, Tohoku University, 61(2005), 46-52
  24. Structural Change of the Iron Ore Sintering Bed and its Control
    Eiki Kasai: Proc. 2nd Baosteel Biennial Academic Confernece Vol. 1, Shanghai, 2(2006), 39-44
  25. Effects of Promoting and Suppressing Materials on Dioxin Emissions in Iron Ore Sintering Process
    Masaru Matsumura, Takazo Kawaguchi and Eiki Kasai: Proc. Asia Steel Intrernational Conference 2006 (May 9 - 11), Fukuoka, (2006), 416-421
  26. A Dry Uultrasonic-Based Method for Mechanical Coating
    S. Komarov, Sang Han Son, S. Kaloshkin and E.Kasai: Proc. 13th International Symposium on Metastable and Nano Materials (ISMANAM 2006), Poland, (2006), 135-141
  27. In situ Observation of the Structural Change of the Iron Ore Sintering Bed and its Applications
    Eiki KASAI: Proc. First Australia-China-Japan Symposium on Iron and Steelmaking, Shenyang, China, (2006), 127-133
  28. A New Mechanochemical Method for Armouring or Coating of Metallic Surfaces
    Sergey Komarov, Sang Han Son, Sergey Kaloshkin, Oleg Abramov and Eiki Kasai: Materials science & technology, Cincinnati, USA, (2006), CD-ROM
  29. Effect of High Productivity on Melting and Dripping Properties of Ferrous Burden in Blast Furnace
    W. Shengli, X. Haifa, C. Hui, Eiki Kasai and T. Yunqing: Proc. 4th International Congress on the Science and Technology of Ironmaking (ICSTI ’06), Osaka, (2006), 212-215
  30. Theoretical Analysis for Gas Channels Distribution under Process of High Wind and Oxygen Volume in Blast Furnace
    W. Shengli, C. Hui, H. Xiaoming and Eiki Kasai: Proc. 4th International Congress on the Science and Technology of Ironmaking (ICSTI' 06), Osaka, (2006), 468-471
  31. Chemical Forms of the Chlorine and Carbon in Dust Samples Formed in a Sintering Process of Iron Ores
    Naoto Tsubouchi, Eiki Kasai, Yoshihito Nakazato, Hidekazu Hayashi and Yasuo Ohtsuka: Proc. 4th International Congress on the Science and Technology of Ironmaking (ICSTI ’06), Osaka, (2006), 723-726
  32. アスベスト廃棄物溶融固化処理における融液流動性評価法の検討
    真瀬裕伴, 後藤廣, 村上太一, 葛西栄輝: 廃棄物学会論文集, 19(2008), pp. 845-847
  33. 廃棄物焼却灰溶融炉によるアスベスト廃棄物と焼却灰の溶融処理
    葛西栄輝, 後藤廣, 真瀬裕伴, 村上太一: 廃棄物学会論文集, 19(2008), pp. 848-850
  34. Effect of Composite Structure on the Reduction of Hematite and Plastic Mixture
    Taichi Murakami, Takumi Akiyama, Eiki Kasai: Proc. 2nd Japan-Australia-China Symposium on Iron and Steelmaking, Kyoto, Japan, (2008), CD-ROM
  35. Effect of Composite Structure on the Reduction of Hematite and Plastic Mixture
    Taichi Murakami, Takumi Akiyama, Eiki Kasai: Journal of University of Science and Technology Beijing, 15(2008), 6, pp. 671-677

ページのトップへ

資料・解説・総説
  1. シミュレータによる焼結ベッドの高温帯の解析
    葛西栄輝，大森康男: 昭和60年度全国地下資源関係学協会合同秋季大会分科研究会資料，日本鉱業会，(1985), (I)1-4
  2. 鉄鉱石焼結プロセスの高温帯における反応・現象の解析
    葛西栄輝，大森康男: 日本金属学会会報，25(1986), 603-607
  3. Advanced Iron Ore Preparation (Keynote lecture)
    Yasuo Omori and Eiki Kasai: 6th IISC, (1990), Vol.2, Nagoya, Japan, ISIJ, 1-14
  4. 無機脆性材料単粒子の強度と破砕性
    葛西栄輝，柳　鎬鎮，齋藤文良: 東北大学選研彙報，47(1991), 168-179
  5. 鉄鉱石焼結プロセスにおける砕成物粒度制御の現状と関連する最近の研究
    葛西栄輝，齋藤文良: 粉砕，36(1992), 64-72
  6. メカノケミカル効果と無機物質の改質・合成
    葛西栄輝，齋藤文良: 東北大学素材工学研究所彙報, 48(1992), 107-118
  7. 焼結鉱製造におけるプロセスおよび成品評価の課題
    葛西栄輝，大森康男: 鉄と鋼，79(1993), 1217-1223
  8. FT-IR による炭材燃焼排出ガス中窒素酸化物濃度の迅速定量
    葛西栄輝: 島津科学計測ジャーナル, 島津製作所, 5(1993), No.2, 86-90
  9. YBaCuO系超伝導セラミックスの合成と特性に及ぼす混合粉砕の影響
    柳　鎬鎮，葛西栄輝，杉山和正，齋藤文良:化学工学シンポジウムシリーズ，34(1993), 54-59
  10. 複合材料用炭素繊維の直接圧縮・圧裂特性測定法
    Armando. H. Shinohara, 佐藤史夫，葛西栄輝，齋藤文良: 東北大学選研彙報，50(1994)，56-66
  11. セラミックス素材の微粉砕に関する研究の現状
    葛西栄輝，齋藤文良: 金属，65(1995), No.5, 407-414
  12. 窒素酸化物の低減　―鉄鉱石焼結プロセスの場合―
    葛西栄輝，齋藤文良: 金属，66(1995), No.2, 99-108
  13. セラミックス素材製造におけるボーキサイト残渣の資源化
    葛西栄輝，齋藤文良: 金属, 臨時増刊号(96/8), (1996), 105-114
  14. 金属熱還元法による素材プロセス研究における新しい展開 −導電体を介した反応(EMR)制御によるチタン製造プロセスへの応用−
    岡部　徹，宇田哲也，葛西栄輝，早稲田嘉夫: 金属, 臨時増刊号(96/8), (1996), 123-132
  15. レアメタルの新しい精錬方法 −究極の脱酸技術を目指して−
    岡部　徹，葛西栄輝，早稲田嘉夫: 金属, 臨時増刊号(96/8), (1996), 133-140
  16. 燃焼プロセスにおけるダイオキシン類の発生挙動
    葛西栄輝，柴田　清，早稲田嘉夫：金属，67(1997), 763-774
  17. 接触させずに反応させる −新しい発想“導電体を介した反応(EMR)” による素材プロセス−
    岡部　徹 , 宇田哲也 , 葛西栄輝 , 早稲田嘉夫 : バウンダリー , 13 (1997) , 42-51
  18. Numerical Modeling of Granular/Particulate Systems by Discrete Element Method Maximiano V. Ramos, Junya Kano and Eiki Kasai: High Temperature Materials and Processes, 17(1998), 275-288
  19. 鉄鉱石焼結プロセスと環境問題
    葛西栄輝: 金属，69(1999), 501-512
  20. ダイオキシン類汚染土壌の高効率燃焼分解処理技術
    葛西栄輝: 「土壌におけるダイオキシン類汚染の実態・規制と浄化技術」講演論文集，技術情報センター，(2000), 37-47
  21. Remediation Technologies of Ash and Soil Contaminated by PCDD/Fs and Relating Hazardous Compound
    Harjanto Sri, Eiki Kasai and Takashi Nakamura: ISIJ International, 40(2000), 266-274
  22. ゾーンコンバッションプロセスによるダイオキシン類汚染土壌の高効率浄化
    葛西栄輝，Sri Harjanto，照井利勝，中村　崇: 「ダイオキシン対策の粉体技術」技術討論会テキスト，粉体工学会，(2000), 35-38
  23. 鉄鋼材料のリサイクル技術の動向
    中村　崇，葛西栄輝，早稲田嘉夫: ふぇらむ, 5(2000), 512-517
  24. 鉄鋼リサイクルの背景と技術動向　＜素材リサイクルの必要性と問題点＞
    葛西栄輝，中村　崇: 配管技術, 43(2001), No.4, 22-28
  25. 高温プロセスのダイオキシン対策　−鉄鉱石焼結プロセスの場合−
    葛西栄輝，青野照彦: 金属, 71(2001), 341-348
  26. 鉄鉱石焼結プロセスにおけるダイオキシン類の挙動
    葛西栄輝，青野照彦: 鉄と鋼, 87(2001), 228-237
  27. 製鉄プロセスにおける最近のダイオキシン類関連研究
    葛西栄輝: ふぇらむ, 8 (2003), 94-100
  28. 炭素材の低温酸化に伴うダイオキシン類生成反応
    葛原俊介，葛西栄輝: 鉄と鋼, 89 (2003), 811-818
  29. Effect of Chlorine on the Vaporization Behavior of Zinc and Lead during High Temperature Treatment of Dust and Fly Ash
    Yan-ling Zhang and Eiki Kasai: ISIJ International, 44(2004), 1457-1468
  30. Preface to the Special Issue on "Recent Progress of the Research on the Iron Ore Agglomeration Process"
    Eiki Kasai: ISIJ International, 45(2005), 413
  31. 離散要素法シミュレーションによる鉄鉱石造粒過程の解析
    加納純也，葛西栄輝，齋藤文良，川口尊三: 鉄と鋼, 92(2006), 742-747
  32. 焼結ケーキ中の空隙構造制御のための層構造設計
    葛西栄輝，Sergey Komarov，主代晃一，中野正則: 鉄と鋼, 92(2006), 788-793
  33. 高温プロセスにおけるダイオキシン類発生に関する研究動向 (Recent Research Trends on the Dioxin Emissions in High Temperature Process)
    葛西栄輝: 高温学会誌, 34(2008), 104-110

ページのトップへ

その他（討論会、基調講演資料など）
  1. シミュレータによる焼結過程の溶融・凝固現象の解析
    葛西栄輝，八木順一郎，大森康男：鉄と鋼，70(1984), A129-132
  2. 焼結原料事前処理に関する最近の研究および技術の進歩
    大森康男，葛西栄輝：鉄と鋼，71(1985), A169-172
  3. 鉄鉱石焼結原料擬似粒子の設計に関する基礎的検討
    葛西栄輝，大森康男：鉄と鋼，74(1988), A954-957
  4. 焼結鉱成品歩留り向上技術に関する一考察
    大森康男，葛西栄輝：CAMP ISIJ, 3(1990), A972-974
  5. 焼結鉱製造におけるプロセスおよび成品評価の課題（基調講演資料）
    葛西栄輝，大森康男：CAMP ISIJ, 5(1992), 1030-1033
  6. 鉄鉱石焼結プロセスにおける原料設計への指針（基調講演資料）
    葛西栄輝：CAMP ISIJ, 8(1995), 841-844
  7. 高結晶水含有鉱石を原料とした焼結鉱の製造における粗大気孔の抑制
    大友崇穂，田口　昇，葛西栄輝：CAMP ISIJ, 8(1995), 849-851
  8. 粘土鉱物と消石灰との混合粉砕によるトリカルシウムアルミネートの常温合成法の開発
    斎藤文良 , 葛西栄輝 : ホソカワ粉体工学研究財団報告書 , (1996) , 64-66
  9. 鉄鉱石焼結強度支配要因に関する基礎的考察
    葛西栄輝，Maximiano V. Ramos，大友崇穂：CAMP ISIJ, 11(1998), 71-74
  10. 粒子要素法による溶融帯を考慮した鉄鉱石焼結過程のシミュレーション
    加納純也，Maximiano V. Ramos，葛西栄輝，齋藤文良：CAMP ISIJ, 11(1998), 75-77
  11. 鉄鉱石の粒度分布を考慮した融液生成の考察
    葛西栄輝：CAMP ISIJ, 13(2000), 714-717
  12. 焼結過程における融液制御への指針
    葛西栄輝：CAMP ISIJ, 14(2001), 71-79
  13. 焼結ケーキ空隙構造制御のための原料充填構造設計
    葛西栄輝：CAMP ISIJ, 15(2002), 718-721
  14. 離散要素法による鉄鉱石造粒速度解析の試み
    加納純也，葛西栄輝, 森洋人，齋藤文良，川口尊三 ：CAMP ISIJ, 16(2003), 87-90
  15. 離散要素法による鉄鉱石造粒過程のシミュレーション
    加納純也，葛西栄輝，森洋人，齋藤文良，川口尊三：CAMP ISIJ, 17(2004), 570-573
  16. 焼結層の空隙構造形成過程とその制御へのアプローチ
    葛西栄輝，Sergey Komarov，主代晃一，中野正則：CAMP ISIJ, 17(2004), 582-585
  17. 複合原料層焼結法に関する考察
    川口尊三，碓井建夫，葛西栄輝，月橋文孝，中野正則，主代晃一：CAMP ISIJ, 17(2004), 606-609
  18. A New Agglomeration Process of Iron Ores Aiming to the Energy Saving & Flexibility Increase for Resources
    Eiki Kasai：（招待講演）International Conference on Agglomeration of Iron Ores, Changsha, China, (2006.11.4)

ページのトップへ

公開特許
  1. 大森康男，葛西栄輝，杉山 健，城内章治，稲葉晋一，森岡耕一：特開平05-105969「焼結鉱の製造方法」，公開日April 27, 1993
  2. 齋藤文良，葛西栄輝，丹生光雄：特開平6-39311「アルミナ含有鉱石からの磁性物質の除去方法」，公開日 Feb. 15, 1994
  3. 丹生光雄，弓達 靖，石田隆浩，齋藤文良，葛西 栄輝：特開平6-172876「ボーキサイト溶解残渣よりなる製鉄用原料組成物の製造方法」，公開日June 21, 1994
  4. 大森康男，葛西栄輝，坂田 誠，杉山 健，岩切治久，森岡 耕一：特開平6-271878「焼結鉱製造用燃料及び該燃料の製造方法」，公開日Sept. 27, 1994
  5. 早稲田嘉夫，葛西栄輝，花田光雄，伊東裕恭，中澤壯三：特開平10-245637「焼結鉱の製造方法」，公開日Sept. 14, 1998
  6. 秋山友宏，八木順一郎，葛西栄輝：特開2000-103603 (P2000-103603A)「化学反応を利用する高温融体からの熱回収方法」，公開日April 11, 2000
  7. 川口尊三，葛西栄輝：特開2000-192154 (P2000-192154A)「部分還元ペレットの製造方法」，公開日July 11, 2000
  8. 葛西栄輝，葛原俊介，照井敏勝：特願2005-103364「ダイオキシン類の発生抑制方法およびダイオキシン類の発生抑制装置」，出願日March 31, 2005
  9. 秋山友宏，柏谷悦章，林 潤一郎，ハディ･プルワント：特願2005-236786「製鉄方法」，出願日August 17, 2005，特開2008-274309
  10. コマロフ　セルゲイ、葛西栄輝、齋藤文良、加納純也、林　直人：特願2006-17502「コーティング装置とその処理方法 」，出願日January 26, 2006，特開2007-197767
  11. 中嶋英雄、葛西栄輝、他：特願2007-77132，特公2008-231562「皮膜形成用組成物及びその利用」

ページのトップへ

 業績/PUBLICATION

葛西 栄輝 村上 太一