佐藤裕研究室|東北大学大学院工学研究科マテリアル・開発系 材料システム工学専攻 接合界面制御学講座

論文/成果 - Papers/Achievements

  • 【発表論文】 Kiyoaki T. Suzuki, Shun Tokita, Sylvain Dancette, Yutaka S. Sato (2025) “Multimodal analysis of aluminum-steel dissimilar joint interface: Strength improvement mechanism through Ni addition”. Materials & Design. https://doi.org/10.1016/j.matdes.2025.114236
  • 【発表論文】 Kiyoaki T. Suzuki, Yutaka S. Sato, Shun Tokita, Joël Lachambre, Sylvain Dancette (2025) “Hybrid Inverse Modeling Technique to Determine the Fracture Properties of Intermetallic Layer Formed at Al/Steel Dissimilar Weld Interface”. Mechanisms and Machine Science. https://doi.org/10.1007/978-3-031-82907-9_67
  • 【発表論文】 Yipu Xu, Run-Zi Wang, Yutaka S. Sato, Shun Tokita, Yue Zhao, Zongli Yi, Aiping Wu (2025) “Interfacial characteristics and microstructural evolution of austenitic to ferritic stainless steels bimetallic structure fabricated by wire-arc directed energy deposition”. Additive Manufacturing. https://doi.org/10.1016/j.addma.2024.104629
  • 【学会発表】 佐藤裕, 田村旭, 鴇田駿, 山本憲吾, 村上浩二, 鹽津陵雅, 白水和生 (2025) "AA5052/ADC12の重ね摩擦攪拌接合部の引張せん断強度に及ぼす接合速度の影響". 2025年度溶接学会春季全国大会 東京都
  • 【学会発表】 鈴木聖顕, 鴇田駿, Sylvain Dancette, 佐藤裕 (2025) "界面反応層の3次元観察によるFe/Al異材接合部の強化機構解明". 2025年度溶接学会春季全国大会 東京都
  • 【学会発表】 Yutaka S. Sato, Asahi Tamura, Shun Tokita, Kengo Yamamoto, Koji Murakami, Ryoga Shiotsu, Kazuo Shiramizu (2025) "Effect of welding speed on tensile shear strength of friction stir lap weld of wrought AA5052 to die-cast A383". TMS 2025 (154th Annual Meeting & Exhibition) USA
  • 【発表論文】 林飛勇向, 鴇田駿, 佐藤裕, 木村友則, 川中啓嗣, 保田雄亮, 朴勝煥 (2024) “レーザ粉末床溶融結合法で得られたAl-10Si-Mg合金積層造形体のミクロ組織と機械的性質”. 軽金属溶接. https://doi.org/10.11283/jlwa.62.581
  • 【学会発表】 Yutaka S. Sato, Kiyoaki T. Suzuki, Shun Omura, Shun Tokita (2024) "Control of interfacial microstructure of dissimilar weld of aluminum to steel". 4th International Symposium on Computer-Aided Welding Engineering and Additive Manufacturing 中国
  • 【学会発表】 佐藤裕, 田村拓海, 鴇田駿 (2024) "局所抵抗加熱を用いた低変形固相接合による鉄鋼とアルミニウム合金の異材接合". 2024年度溶接学会秋季全国大会 大阪府
  • 【学会発表】 関根沙文, 鴇田駿, 佐藤裕, 畠山友孝, 澤田浩太 (2024) "火SUS310JTBへの粒界工学の適用". 一般社団法人鉄鋼協会 第188回秋季講演大会 大阪府
  • 【学会発表】 國岡海咲, 鴇田駿, 佐藤裕, 福田知之, 清木晋一郎, 仲原知己, 藤井淳 (2024) "高圧水素用ステンレス鋼ティグ溶接部のミクロ組織と機械的特性". 2024年度溶接学会秋季全国大会 北海道
  • 【学会発表】 鴇田駿, 久米俊也, 佐藤裕, 桑嶋孝幸, 園田哲也, 佐々木龍徳 (2024) "コールドスプレー法で得られたチタン多孔質膜を介した金属/樹脂の通電加熱接合". 2024年度溶接学会秋季全国大会 北海道
  • 【学会発表】 Ogawa Ami Wiyada, 鴇田駿, 佐藤裕 (2024) "Al合金とPA66の異種超音波接合部の継手強度に及ぼす接合条件の影響". 2024年度溶接学会秋季全国大会 北海道
  • 【学会発表】 鈴木聖顕, 佐藤裕, 鴇田駿, Sylvain Dancette, Joel Lachmber (2024) "DIC-FEMハイブリッドモデルを用いたFe/Al異材接合部の界面層特性の逆推定". 2024年度溶接学会秋季全国大会 北海道
  • 【学会発表】 青山悠人, 鴇田駿, 佐藤裕, 須藤祐司 (2024) "Ag系金属箔ろうを介したCu/AlN真空ろう付における接合メカニズムの検討". 2024年度溶接学会秋季全国大会 北海道
  • 【学会発表】 早苗拓哉, 鴇田駿, 佐藤裕, 蔡哲瑋 (2024) "Al/Fe異種金属接合におけるCoCrFeMnNiハイエントロピー合金インサートの効果". 2024年度溶接学会秋季全国大会 北海道
  • 【発表論文】 Kiyoaki T. Suzuki, Shun Omura, Shun Tokita, Yujiro Tatsumi, Sylvain Dancette, Yutaka S. Sato (2024) “Improved strength and interfacial microstructure of dissimilar Al/steel weld via combined addition of Zn and Ni”. Materials & Design. https://doi.org/10.1016/j.matdes.2024.113302
  • 【学会発表】 Yipu Xu, Yutaka S. Sato, Shun Tokita, Yue Zhao, Zongli Yi, Aiping Wu (2024) "Interfacial characteristics of austenitic-ferritic stainless steels bimetallic structure fabricated by dual-wire additive manufacturing". ICCE2024(The 30th International Conference on Computational & Experimental Engineering and Sciences) Singapore
  • 【学会発表】 Kiyoaki T. Suzuki, Sylvain Dancette, Shun Tokita, Yutaka S. Sato (2024) "Hybrid inverse modeling technique to determine the fracture properties of intermetallic layer formed at Al/steel dissimilar weld interface". ICCE2024(The 30th International Conference on Computational & Experimental Engineering and Sciences) Singapore
  • 【学会発表】 Run-Zi Wang, Yutaka S. Sato, Shun Tokita, Xian-Cheng Zhang, Shan-Tung Tu (2024) "【INVITED】Engineering damage theory based on multidisciplinary paradigm in the context of carbon neutrality". ICCE2024(The 30th International Conference on Computational & Experimental Engineering and Sciences) Singapore
  • 【発表論文】 Shun TOKITA, Cheng Yi LIU, Yutaka S. SATO (2023) “Effects of material combination for ultrasonic spot welding on microstructure and strength of Al/Al, Al/Cu, and Al/Ni dissimilar joints”. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.09.094
  • 【発表論文】 Kiyoaki T. Suzuki, Shun Omura, Shun Tokita, Yutaka S. Sato, Yujiro Tatsumi (2023) “Drastic Improvement in Dissimilar Aluminum-to-Steel Joint Strength by Combining Positive Roles of Silicon and Nickel Additions”. Materials & Design. https://doi.org/10.1016/j.matdes.2022.111444
  • 【発表論文】 Poying Hsieh, Chihhsien Liao, Hungchih Liu, Poting Lin, Paikeng Shen, Shaowei Hunag, Yutaka S. Sato, Chewei Tsai (2022) “Microstructure and mechanical property of gas tungsten arc and friction stir welds of L12 precipitate FCC high-entropy alloy”. APL Materials. https://doi.org/10.1063/5.0117251
  • 【発表論文】 伊藤 宜司, 相澤 隆博, 浮田 康成, 佐藤 裕 (2022) “結晶構造解析を用いたAl-Al超音波接合の条件適正化”. エレクトロニクス実装学会誌. https://doi.org/10.5104/jiep.jiep-d-21-00090
  • 【発表論文】 Kota Kurabayashi, Shun Tokita, Yutaka S. Sato (2022) “Effect of Ni Addition on the Interfacial Strength of Al/Cu Dissimilar Welds Produced by Friction Stir Lap Welding”. Metals. https://doi.org/10.3390/met12030453
  • 【発表論文】 佐藤裕, 宮森智子, 鴇田駿, 粉川博之 (2022) “炭素鋼の摩擦攪拌接合性に及ぼす水中施工および表面錆の影響”. 鉄と鋼. https://doi.org/10.2355/tetsutohagane.tetsu-2022-024
  • 【発表論文】 Hiroki S. Furuya, Sakiko Yabu, Yutaka S. Sato, Hiroyuki Kokawa (2021) “Microstructural Control of the Interface Layer for Strength Enhancement of Dissimilar Al/Cu Joints via Ni Addition during TIG Arc Brazing”. Metals. https://doi.org/10.3390/met11030491
  • 【発表論文】 Yutaka S. Sato, Yuichiro Tanai, Dalong Yi, Tianbo Zhao, Hiroyuki Kokawa (2021) “Effect of Tool Geometries on “Heat-Input” During Friction Stir Welding of Aluminum Alloys”. Friction Stir Welding and Processing XI, The Minerals, Metals & Materials Series. https://doi.org/10.1007/978-3-030-65265-4_16
  • 【発表論文】 K. T. Suzuki, Y. S. Sato, S. Tokita (2020) “Rapid Joining of Commercial-Purity Ti to 304 Stainless Steel Using Joule Heating Diffusion Bonding: Interfacial Microstructure and Strength of the Dissimilar Joint”. Metals. https://doi.org/10.3390/met10121689
  • 【発表論文】 Shun Tokita, Hiroyuki Kokawa, Shohei Kodama, Yutaka S. Sato, Yuji Sano, Zhuguo Li, Kai Feng, Yixiong Wu (2020) “Suppression of intergranular corrosion by surface grain boundary engineering of 304 austenitic stainless steel using laser peening plus annealing”. Materials Today Communications. https://doi.org/10.1016/j.mtcomm.2020.101572
  • 2016年10月 10th Trends in Welding Research & 9WS (日本・東京) 実行委員会幹事
  • 2015年10月 FSWP2015 (スペイン・オルディジア) 基調講演
  • 2015年9月 2nd Intern. Conf. Friction Based Processes (中国・北京) 招待講演
  • 2015年8月 ISAWTC2015 (中国・海寧) 招待講演
  • 2015年3月 FSW/P session at TMS Meeting (米国・オーランド) Organizer、招待講演
  • 2015年3月18日 日本金属学会 第73回功績賞 (材料プロセッシング部門)