Yoshimi Lab. - 吉見研究室

Tohoku University

Ultra-High Temperature Materials Group
Depertment of Materials Science, Tohoku University

吉見研究室東北大学 大学院工学研究科・工学部 知能デバイス材料学専攻 ナノ材料物性学講座 強度材料物性学分野

Contact us
facebook

Achievements - 論文/成果

2021

  • Xi Nan, Tomotaka Hatakeyama, Shuntaro Ida, Nobuaki Sekido, and Kyosuke Yoshimi: "Effect of Cr and Al alloying on the oxidation resistance of a Ti5Si3-incorporated MoSiBTiC alloy", High Temperature Materials and Processes, 40 (2021), 204–213.
    (DOI: 10.1515/htmp-2021-0024)
  • Linye Zhu, Shuntaro Ida, Georg Hasemann, Manja Kruger, Kyosuke Yoshimi: "Microstructural characterization of arc-melted and directionally solidified near eutectic molybdenum-silicon-boron alloys", Intermetallics, 132 (2021), 107131.
    (DOI: 10.1016/j.intermet.2021.107131)
  • G. Hasemann, L. Zhu, K. Hauschildt, M. Blankenburg, S. Ida, F. Pyczak, K. Yoshimi and M. Krüger: "In situ Observation of Ternary Eutectic Growth in a Directionally Solidified Mo–Si–B Alloy Using High-Energy Synchrotron X-Rays", Advanced Engineering Materials, (2021), 2100111.
    (DOI: 10.1002/adem.202100111)
  • Kouichi Maruyama, Nobuaki Sekido, Kyosuke Yoshimi: "Changes in strengthening mechanisms in creep of 9Cr-1.8W-0.5Mo-VNb steel tested over wide ranges of creep conditions", International Journal of Pressure Vessels and Piping, 190 (2021), 104312.
    (DOI: 10.1016/j.ijpvp.2021.104312)
  • 井田駿太郎, 渡邊憲郷, 関戸信彰, 吉見享祐: "非化学量論性を利用した高靭性TiC相", 日本学術振興会耐熱金属材料第123委員会研究報告, 62(1) (2021), 105-117.
  • Tomohisa Ogawa, Rie Sato, Takako Naganuma, Kayeu Liu, Saho Sato, Shizuka Sakaue, Makoto Osada, Kyosuke Yoshimi and Koji Muramoto: "Diversified biomineralization roles of pteria penguin pearl shell lectins as matrix proteins", International Journal of Molecular Sciences, 22(3) (2021), 1-12.
    (DOI: 10.3390/ijms22031081)

2020

  • 小山内匠, 関戸信彰, 米村光治, 丸山公一, 吉見享祐: "先進9%Crフェライト系耐熱鋼の焼戻し過程におけるBの偏析と炭化物の析出挙動", 日本学術振興会耐熱金属材料第123委員会研究報告, 61(3) (2020), 283-292.
  • 渡邊憲郷, 井田駿太郎, 吉見享祐: "鋳造法で作製されたFe/TiC過共晶三元合金のミクロ組織と室温変形挙動", 日本学術振興会耐熱金属材料第123委員会研究報告, 61(3) (2020), 309-321.
  • Tomotaka Hatakeyama, Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi: "Significant improvement of the oxidation resistance of MoSiBTiC-based multiphase alloys by Ti enrichment", Corrosion Science, 176 (2020), 108937.
    (DOI: 10.1016/j.corsci.2020.108937)
  • Xi Nan, Mi Zhao, Yuanyuan Lu, Nobuaki Sekido, Kyosuke Yoshimi: "High-temperature oxidation behavior of a Ti5Si3-incorporated MoSiBTiC alloy", Intermetallics, 125 (2020), 106895.
    (DOI: 10.1016/j.intermet.2020.106895)
  • Tomotaka Hatakeyam, Nobuaki Sekido, Yuta Kimura, Kyosuke Yoshimi: "Orientation relationship between bcc precipitates and Ti5Si3 matrix in Mo–Si–B–Ti–C quinary alloys", Intermetallics, 124 (2020), 106863.
    (DOI: 10.1016/j.intermet.2020.106863)
  • Hiroyuki Fukuyama, Makoto Ohtsuka, Ryogo Sawada, Haruki Nakashima, Yasuo Ohishi, Naohisa Hirao, Masaki Takata, Kyosuke Yoshimi: "Dynamic observation of MoSiBTiC alloy phase transitions using in situ ultrahigh-temperature X-ray diffraction measurement", Materialia, 13 (2020), 100867.
    (DOI: 10.1016/j.mtla.2020.100867)
  • 束村基行, 山室賢輝, 関戸信彰, 連川貞弘, 吉見享祐: "Ti とAl を共添加したMoSiBTiC 合金のミクロ組織と相安定性", 日本金属学会誌, 84(7) (2020), 217-226.
    Motoyuki Tsukamura, Takateru Yamamuro, Nobuaki Sekido, Sadahiro Tsurekawa, Kyosuke Yoshimi: "Microstructure and phase stability of Ti and Al co-added MoSiBTiC alloys", Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 84(7) (2020), 217-226.
    (DOI: 10.2320/jinstmet.J2019050)
  • Y. Lu, M. Watanabe, R. Miyata, J. Nakamura, J. Yamada. H. Kato, K. Yoshimi: "Microstructures and mechanical properties of TiC-particulate-reinforced Ti–Mo–Al intermetallic matrix composites", Materials Science and Engineering A, (2020), 139523.
    (DOI: 10.1016/j.msea.2020.139523)
  • Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi: "Solidification pathways and phase equilibria in the Mo–Ti–C ternary system", High Temperature Materials and Processes, 39(1) (2020), 164–170.
    (DOI: 10.1515/htmp-2020-0053)
  • Sojiro Uemura, Shiho Yamamoto Kamata, Kyosuke Yoshimi, Sadahiro Tsurekawa: "Microstructural evolution during high-temperature tensile creep at 1,500℃ of a MoSiBTiC alloy", High Temperature Materials and Processes, 39(1) (2020), 136–145.
    (DOI: 10.1515/htmp-2020-0039)
  • Weiwei Zhou, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki: "Novel laser additive-manufactured Mo-based composite with enhanced mechanical and oxidation properties", Journal of Alloys and Compounds, 819 (2020), 152981.
    (DOI: 10.1016/j.jallcom.2019.152981)
  • David Bürger, Antonin Dlouhý, Kyosuke Yoshimi, Gunther Eggeler: "How Nanoscale Dislocation Reactions Govern Low-Temperature and High-Stress Creep of Ni-Base Single Crystal Superalloys", Crystals, 10 (2020), 134.
    (DOI: 10.3390/cryst10020134)
  • 関戸信彰, 木村勇太, 小山内匠, 宮城俊美, 沼倉宏, 吉見享祐: "高周波グロー放電発光分析法を用いた鉄固溶体におけるホウ素の固溶限測定", 鉄と鋼, 106(6) (2020), 292-301.
    Nobuaki Sekido, Yuta Kimura, Takumi Osanai, Toshimi Miyagi, Hiroshi Numakura, Kyosuke Yoshimi: "Evaluation of Boron Solubility in Iron Solid Solution by Radio-frequency Glow-discharge Optical Emission Spectroscopy", Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 106(6) (2020), 292-301.
    (DOI: 10.2355/tetsutohagane.TETSU-2019-114)
  • Tomotaka Hatakeyama, Nobuaki Sekido, Kyosuke Yoshimi: "Effect of Cr addition on microstructure and oxidation resistance of a Ti5Si3-containing MoSiBTiC alloy", Corrosion Science, 166 (2020), 108418.
    (DOI: 10.1016/j.corsci.2019.108418)
  • Y.Lu, J.Yamada, R.Miyata, H.Kato, K.Yoshimi: "High-temperature mechanical behavior of B2-ordered Ti–Mo–Al alloys", Intermetallics, 117 (2020), 106675.
    (DOI: 10.1016/j.intermet.2019.106675)
  • Sheng Xu, Ryota Tsukuda, Mi Zhao, Xiao Xu, Toshihiro Omori, Kyosuke Yoshimi, Ryosuke Kainuma: "Negative Poisson’s ratio in Heusler-type Cu–Al–Mn shape memory alloy", Scripta Materialia, 177 (2020), 74–78.
    (DOI: 10.1016/j.scriptamat.2019.10.015)
  • G. Hasemann, S. Ida, L. Zhu, T. Iizawa, K. Yoshimi, M. Krüger: "Experimental assessment of the microstructure evolution and liquidus projection in the Mo-rich Mo-Si-B system", Materials & Design, 185 (2020), 108233.
    (DOI: 10.1016/j.matdes.2019.108233)
  • D. Bürger, A. Dlouhý, K. Yoshimi, G. Eggeler: "On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys", Materials Science and Engineering A, 795 (2020), 139961.
    (DOI: 10.1016/j.msea.2020.139961)
  • D. Demirskyi, T. Nishimura, T.S. Suzuki, Y. Sakka, O. Vasylkiv and K. Yoshimi: "High-temperature toughening in ternary medium-entropy (Ta1/3Ti1/3Zr1/3)C carbide consolidated using spark-plasma sintering", Journal of Asian Ceramic Societies, 8(4) (2020), 1262-1270.
    (DOI: 10.1080/21870764.2020.1840703)
  • Dmytro DEMIRSKYI, Tohru S. SUZUKI, Kyosuke YOSHIMI, Oleg VASYLKIV: "Synthesis of medium-entropy (Zr1/3Hf1/3Ta1/3)B2 using the spark plasma consolidation of diboride powders", Journal of the Ceramic Society of Japan, 128(11) (2020), 977-980.
    (DOI: 10.2109/jcersj2.20151)
  • Y. Lu, N. Sekido, K. Yoshimi, S.N. Yarmolenko, Q. Wei: "Microstructures and mechanical properties of Mg/Zr nanostructured multilayers with coherent interface", Thin Solid Films, 712 (2020), 138314.
    (DOI: 10.1016/j.tsf.2020.138314)
  • K. Maruyama, N. Sekido, K. Yoshimi, Y. Yamamoto: "A grain size-dependent equation for creep rupture life of grade 91 steel verified up to 233,000 hours", Journal of Pressure Vessel Technology, Transactions of the ASME, 142(6) (2020), 61505.
    (DOI: 10.1115/1.4047442)
  • Shao-yu Yen, Shu-chang Wu, M. Anshar Makhraja, Kai-chi Lo, An-chou Yeh, Kyosuke Yoshimi, Chuan Zhang, Shih-kang Lin: "Phase equilibria and thermodynamic assessment of the Mo–Nb-Re ternary system", Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 70 (2020), 101797.
    (DOI: 10.1016/j.calphad.2020.101797)
  • Weiwei Zhou, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki: "In-situ formation of ceramic layer on Mo-based composites via laser powder bed fusion", Materialia, 10 (2020), 100655.
    (DOI: 10.1016/j.mtla.2020.100655)
  • Weiwei Zhou, Kengo Tsunoda, Naoyuki Nomura, Kyosuke Yoshimi: "Effect of hot isostatic pressing on the microstructure and fracture toughness of laser additive-manufactured MoSiBTiC multiphase alloy", Materials and Design, 196 (2020), 109132.
    (DOI: 10.1016/j.matdes.2020.109132)

2019

  • Hiroyuki Fukuyama, Ryogo Sawada, Haruki Nakashima, Makoto Ohtsuka, and Kyosuke Yoshimi: "Study of solidification pathway of a MoSiBTiC alloy by optical thermal analysis and in-situ observation with electromagnetic levitation", Scientific Reports, 9 (2019), 15049.
    (DOI: 10.1038/s41598-019-50945-z)
  • 佐藤 雄大, 関戸 信彰, 吉見 享祐: "粉末冶金法を用いたFe-Al合金におけるAl酸化物析出と固体酸素源種の影響", 粉体および粉末冶金, 66(10) (2019), 478-484.
    Katsuhiro Sato, Nobuaki Sekido, Kyosuke Yoshimi: "Effect of Solid Oxygen Source Species on the Al-Oxide Precipitation Behavior in Fe-Al Alloys by Powder Metallurgy", Journal of the Japan Society of Powder and Powder Metallurgy, 66(10) (2019), 478-484.
    (DOI: 10.2497/jjspm.66.478)
  • Kyosuke Yoshimi, Shiho Kamata, Ryuta Yanagiya, Shuntaro Ida, Sojiro Uemura, Sadahiro Tsurekawa: "ULTRAHIGH-TEMPERATURE TENSILE CREEP BEHAVIOR OF 1ST GENERATION MoSIBTiC ALLOY", Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials (Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials), Ed.by J. Shingledecker, M. Takeyama, ASM International, Almere, Flevoland, (2019), 795-802.
  • Nobuaki Sekido, Tomoyuki Hatta, Kouichi Maruyama, Kyosuke Yoshimi, Mitsuharu Yonemura: "MICROSTRUCTURE EVOLUTION IN A HIGH-BORON FERRITIC STEEL DURING CREEP AT 650℃", Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials (Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials), Ed.by J. Shingledecker, M. Takeyama, ASM International, Almere, Flevoland, (2019), 156-161.
  • Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi: "Effect of Off-stoichiometry on Elastic Modulus of TiC Phase in Mo-TiC ternary System", Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials (Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials), Ed.by J. Shingledecker, M. Takeyama, ASM International, Almere, Flevoland, (2019), 830-835.
  • Tomohisa Ogawa, Rie Sato, Takako Naganuma, Kayeu Liu, Agness Ethel Lakudzala, Koji Muramoto, Makoto Osada, Kyosuke Yoshimi, Keiko Hiemori, Jun Hirabayashi, Hiroaki Tateno: "Glycan Binding Profiling of Jacalin-Related Lectins from the Pteria Penguin Pearl Shell", International journal of molecular sciences, 20(18) (2019), 4629.
    (DOI: 10.3390/ijms20184629)
  • S. Hashimoto, T. Hirota, K. Suzuki, T. Namioka and H. Ito, R. Miyata, H. Takamura, K. Yoshimi, K. Kobayashi, K. Yashiro, T. Kawada, N. Kijima, T. Tsuchiya, T. Manabe, T. Kojima, K. Okai: "A New Development Strategy of Light Weight Solid Oxide Fuel Cells for Electrified Airplane System", AIAA Propulsion and Energy Forum and Exposition, 2019, American Institute of Aeronautics and Astronautics (AIAA), Washington, D.C., (2019), 4470.
    (DOI: 10.2514/6.2019-4470)
  • Takahito Ohmura, Nobuaki Sekido: "Special issue on Recent Advances in Indentation Technique Preface", Materials Transactions, 60(8) (2019), 1403.
    (DOI: 10.2320/matertrans.MPR2019905)
  • Keiko Kobayashi, Ryuichi Miyata, Keiji Yashiro, Hitoshi Takamura, Kyosuke Yoshimi, Tatsuya Kawada, Shinichi Hashimoto, Keiichi Okai: "Evaluation of Titanium Based Alloys as Interconnects for the Light Weight SOFC System", ECS Transactions, 91(1) (2019), 2279-2290.
    (DOI: 10.1149/09101.2279ecst)
  • Shinichi Hashimoto, Tomohisa Hirota, Kenji Suzuki, Tomoaki Namioka, Hibiki Ito, Ryuichi Miyata, Keiko Kobayashi, Keiji Yashiro, Hitoshi Takamura, Tatsuya Kawada, Kyosuke Yoshimi, Norito Kijima, Takaaki Manabe, Tetsuo Tsuchiya, Takayuki Kojima, Keiichi Okai: "Material Development Strategy of Lightweight Solid Oxide Fuel Cells for Airplane System Electrification", ECS Transactions, 91(1) (2019), 311-318.
    (DOI: 10.1149/09101.0311ecst)
  • Shuntaro Ida, Ryosuke Yamagata, Hirotoyo Nakashima, Satoru Kobayashi, Masao Takeyama: "Phase Equilibria Among γ/TCP/GCP Phases in Nb-Poor Region of Ni-Nb-Co Ternary System at Elevated Temperatures", Journal of Phase Equilibria and Diffusion, 40 (2019), 570–582.
    (DOI: 10.1007/s11669-019-00744-w)
  • 吉見享祐, 柳谷隆太, Zhu Linye, 井田駿太郎, 関戸信彰, 連川貞弘, 上村宗二朗: "超高温引張クリープ下における第1世代モシブチック合金中の変形ミクロ組織の発達", 日本学術振興会耐熱金属材料第123委員会研究報告, 60(2) (2019), 282-289.
  • 井田駿太郎, 関戸信彰, 吉見享祐: "Mo-Ti-C3元系における凝固過程およびMo/TiC/Mo2C3相間の相平衡", 日本学術振興会耐熱金属材料第123委員会研究報告, 60(2) (2019), 272-281.
  • 吉見享祐, 関戸信彰, 井田駿太郎: "Mo-Si基金属間化合物からMoSiBTiC合金への展開", まてりあ(日本金属学会報), 58(7) (2019), 363-370.
    (DOI: 10.2320/materia.58.363)
  • Nobuaki Sekido, Ryoma Aizawa, Shunkichi Ueno: "Effect of Cr Addition on the Phase Equilibria and Oxidation Behavior of NbSi2", Materials Transactions, 60 (2019), 666-673.
    (DOI: 10.2320/matertrans.MB201809)
  • Katsuhiro Sato, Nobuaki Sekido, Kyosuke Yoshimi: "Fabrication of oxide dispersion strengthened alloys through solid-state reactions between FeAl and Fe2O3 powders", Materials Science & Engineering A, 754 (2019), 68-74.
    (DOI: 10.1016/j.msea.2019.03.060)
  • D. Demirskyi, H. Borodianska, T.S. Suzuki, Y. Sakka, K. Yoshimi, O. Vasylkiv: "High-temperature flexural strength performance of ternary high-entropy carbide consolidated via spark plasma sintering of TaC, ZrC and NbC", Scripta Materialia, 164 (2019), 12–16.
    (DOI: 10.1016/j.scriptamat.2019.01.024)
  • Kouichi Maruyama, Nobuaki Sekido, KyosukeYoshimi: "Changes in Monkman-Grant relation among four creep regions of modified 9Cr-1Mo steel", Materials Science & Engineering A, 749 (2019), 223-234.
    (DOI: 10.1016/j.msea.2019.02.003)
  • Weiwei Zhou, Xiaohao Sun, Kengo Tsunoda, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki: "Powder fabrication and laser additive manufacturing of MoSiBTiC alloy", Intermetallics, 104 (2019), 33-42.
    (DOI: 10.1016/j.intermet.2018.10.012)

2018

  • 八田智之, 関戸信彰, 米村光治, 丸山公一, 吉見享祐: "フェライト系耐熱鋼における長時間クリープ変形後の析出物の三次元観察", まてりあ(日本金属学会報), 57(12) (2018), 619.
    (DOI: 10.2320/materia.57.619)
  • 吉見享祐, 佐藤裕: "超高温度域まで強じんな新しいモリブデン超合金の発明", 溶接技術, 66(12) (2018), 64-69.
  • Yo TOMOTA, Yan Xu WANG, Takahito OHMURA, Nobuaki SEKIDO, Stefanus HARJO, Takuro KAWASAKI, Wu GONG and Akira TANIYAMA: "In situ Neutron Diffraction Study on Ferrite and Pearlite Transformations for a 1.5Mn-1.5Si-0.2C Steel", ISIJ International, 58(11) (2018), 2125-2132.
    (DOI: 10.2355/isijinternational.ISIJINT-2018-336)
  • 畠山友孝, 関戸信彰, 吉見享祐: "MoSiBTiC合金の機械的性質及び耐酸化性に及ぼすTi5Si3相の影響", 日本ガスタービン学会誌, 46(6) (2018), 486-494.
    HATAKEYAMA Tomotaka, SEKIDO Nobuaki, YOSHIMI Kyosuke: "Effect of Ti5Si3 phase on Mechanical Properties and Oxidation Resistance of MoSiBTiC-based Alloys", JOURNAL OF THE GAS TURBINE SOCIETY OF JAPAN, 46(6) (2018), 486-494.
  • 齋藤哲也, 関戸信彰, 束村基行, 上村宗二朗, 山室賢輝, 連川貞弘, 吉見享祐: "MoSiBTiC合金の室温破壊靱性に対する時効熱処理の効果", 日本学術振興会耐熱金属材料第123委員会研究報告, 59(3) (2018), 505-513.
  • 中村徹之, 石川伸, 吉見享祐: "高耐熱フェライト系ステンレス鋼SUS444の熱疲労挙動に及ぼす塑性ひずみと回復速度の影響", 鉄と鋼, 104(9) (2018), 517-523.
    Tetsuyuki Nakamura, Shin Ishikawa and Kyosuke Yoshimi: "Effect of Plastic Strain and Recovery Rate on Thermal Fatigue Behavior in High Heat-resistant Ferritic Stainless Steel SUS444", Tetsu-to-Hagané, 104(9) (2018), 517-523.
    (DOI: 10.2355/tetsutohagane.TETSU-2018-017)
  • Shiho Yamamoto Kamata, Daiki Kanekon, Yuanyuan Lu, Nobuaki Sekido, Kouichi Maruyama, Gunther Eggeler, Kyosuke Yoshimi: "Ultrahigh-temperature tensile creep of TiC-reinforced Mo-Si-B-based alloy", Scientific Reports, 8 (2018), 10487.
    (DOI: 10.1038/s41598-018-28379-w)
  • 吉見享祐: "状態図に基づいたモシブチック合金の合金設計とミクロ組織制御", 溶射(日本溶射学会誌), 55(2) (2018),73-79.
  • Yusuke Wada, Nobuaki Sekido, Takahito Ohmura and Kyosuke Yoshimi: "Deformation Microstructure Developed by Nanoindentation of a MAX Phase Ti2AlC", Materials Transactions, 59(5) (2018), 771-778.
    (DOI: 10.2320/matertrans.MBW201703)
  • 和田悠佑, 関戸信彰, 大村孝仁, 吉見享祐: "MAX相Ti2AlCにおける塑性変形開始挙動の圧入方位依存性", 日本金属学会誌, 82(5) (2018), 162-168.
    Yusuke Wada, Nobuaki Sekido, Takahito Ohmura and Kyosuke Yoshimi: "Effect of Indentation Orientation on the Onset of Plastic Deformation for a MAX Phase Ti2AlC", J. Japan Inst. Met. Mater., 82(5) (2018), 162-168.
    (DOI: 10.2320/jinstmet.J2017042)
  • Shunichi Nakayama, Nobuaki Sekido, Sojiro Uemura, Sadahiro Tsurekawa and Kyosuke Yoshimi: "Effect of Microstructural Continuity on Room-Temperature Fracture Toughness of ZrC-Added Mo-Si-B Alloys", Materials Transactions, 59(4) (2018), 518-527.
    (DOI: 10.2320/matertrans.MJ201613)
  • Weiwei Zhou, Xiaohao Sun, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki: "In situ synthesized TiC/Mo-based composites via laser powder bed fusion", Materials & Design, 146 (2018), 116-124.
    (DOI: 10.1016/j.matdes.2018.03.001)
  • 丸山公一, 関戸信彰, 吉見享祐: "Gr.91鋼の長時間クリープ破断強度評価の検証", 日本学術振興会耐熱金属材料第123委員会研究報告, 59(1) (2018), 75-86.
  • Sojiro Uemura, Takateru Yamamuro, Jung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, Kyosuke Yoshimi: "Quantitative evaluation of microstructure in Mo-Si-B-TiC alloy produced by melting and tilt casting method", Materials Transactions, 59(1) (2018), 136-145.
    (DOI: 10.2320/matertrans.M2017194)
  • Weiwei Zhou, Xiaohao Sun, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki: "Carbon nanotubes as a unique agent to fabricate nanoceramic/metal composite powders for additive manufacturing", Materials & Design, 137 (2018) 276-285.
    (DOI: 10.1016/j.matdes.2017.10.034)
  • K. Maruyama, F. Abe, H. Sato, J. Shimojo, N. Sekido, K. Yoshimi: "On the physical basis of a Larson-Miller constant of 20", International Journal of Pressure Vessels and Piping, 159 (2018), 93-100.
    (DOI: 10.1016/j.ijpvp.2017.11.013)
  • Shuntaro Ida, Satoru Kobayashi, Masao Takeyama: "Grain boundary precipitation behavior of δ-Ni3Nb(D0a) phase in a Ni-Nb-Fe ternary model alloy", Journal of Alloys and Compounds, 764 (2018), 1033-1038.
    (DOI: 10.1016/j.jallcom.2018.05.169)
  • Kouichi Maruyama, Nobuaki Sekido, Kyosuke Yoshimi: "A proposal for post-assessment test of long-term creep rupture strength of grade 91 steel", ASME 2018 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries (Pressure Technology), American Society of Mechanical Engineers (ASME), New York, USA, (2018), V001T01A001.
    (DOI: 10.1115/ETAM2018-6706)

2017

  • Y. Tomota, N. Sekido, S. Harjo, T. Kawasaki, W. Gong, A. Taniyama: "In situ Observations of Transformation Behavior upon Heating for a 1.5Mn-1.5Si-0.2C Steel -Comparison between Neutron Diffraction, XRD, EBSD and Dilatometry-", ISIJ International, 57(12) (2017), 2237-2240.
    (DOI: 10.2355/isijinternational.ISIJINT-2017-272)
  • N. Sekido, T. Ohmura, J.H. Perepezko: "Mechanical properties and dislocation character of YB4 and YB6", Intermetallics, 89 (2017), 86-91.
    (DOI: 10.1016/j.intermet.2017.05.024)
  • 畠山友孝, 吉見享祐: "MoSiBTiC合金のミクロ組織形成と材料特性に及ぼすTiの効果", 第45回日本ガスタービン学会定期講演会(松山)講演論文集, (2017), 223-228.
  • 鎌田詩歩, Yuanyuan Lu, 吉見享祐: "第1世代モシブチック合金の高温クリープ変形によるミクロ組織劣化", 第45回日本ガスタービン学会定期講演会(松山)講演論文集, (2017), 229-234.
  • 友田陽, 関戸信彰, 徐平光, 川崎卓郎, ハルヨステファヌス, 田中雅彦, 篠原武尚, 蘇玉華, 谷山明 : "種々な方法によるMn-Si-C鋼の残留オーステナイト体積率測定の比較", 鉄と鋼, 103(10) (2017), 570-578.
    Y. Tomota, N. Sekido, P. Xu, T. Kawasaki, S. Harjo, M. Tanaka, T. Shinohara, Y. Su, A. Taniyama: "Comparison of the measurements of austenite volume fraction by various methods for Mn-Si-C steel", Tetsu to Hagané, 103(10) (2017), 570-578.
    (DOI: 10.2355/tetsutohagane.TETSU-2017-045)
  • K. Maruyama, N. Sekido, K. Yoshimi: "A Postassessment Test of 100,000 h Creep Rupture Strength of Grade 91 Steel at 600℃", J. Pressure Vessel Technol, 139(5) (2017), 051404-1-051404-7, PVT-17-1077.
    (DOI: 10.1115/1.4037446)
  • Mi Zhao, Shunichi Nakayama, Tomotaka Hatakeyama, Junya Nakamura, Kyosuke Yoshimi: "Microstructure, high-temperature deformability and oxidation resistance of a Ti5Si3-containing multiphase MoSiBTiC alloy", Intermetallics, 90 (2017), 169-179.
    (DOI: 10.1016/j.intermet.2017.07.018)
  • 関戸信彰, 吉見享祐, 齊藤大蔵, 吉岡洋明: "長時間熱処理した"IN738LC"における粒界近傍組織の3次元観察", 日本学術振興会耐熱金属材料第123委員会研究報告, 58(2) (2017), 161-165.
  • K. Maruyama, J. Nakamura, N, Sekido, K. Yoshimi: "Causes of heat-to-heat variation of creep strength in grade 91 steel", Materials Science & Engineering A, 696 (2017), 104-112.
    (DOI: 10.1016/j.msea.2017.04.050)
  • Yuanyuan Lu, Jyunpei Yamada, Junya Nakamura, Kyosuke Yoshimi, Hidemi Kato: "Effect of B2-ordered phase on the deformation behavior of Ti-Mo-Al alloys at elevated temperature", Journal of Alloys and Compounds, 696 (2017), 130-135.
    (DOI: 10.1016/j.jallcom.2016.11.211)
  • 中村純也, 関戸信彰, 吉見享祐: "電磁超音波共鳴法を用いたMo-Si-B合金の弾性率測定", 日本学術振興会耐熱金属材料第123委員会研究報告, 58(1) (2017), 95-104.
    Junya NAKAMURA, Nobuaki SEKIDO and Kyosuke YOSHIMI: "Elastic Moduli Measurement of Mo-Si-B Alloys by the Electro-Magnetic Acoustic Resonance (EMAR) Method", Report of the 123 Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science, 58(1) (2017)95-104.
  • 丸山公一, 中村純也, 関戸信彰, 吉見享祐: "Gr.91鋼におけるヒート間のクリープ強度差の原因", 日本学術振興会耐熱金属材料第123委員会研究報告, 58(1) (2017), 9-22.
    Kouichi MARUYAMA, Junya NAKAMURA, Nobuaki SEKIDO and Kyosuke YOSHIMI: "Causes of Heat-to-Heat Variation in Creep Strength of Gr.91 Steel", Report of the 123 Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science, 58(1) (2017), 9-22.
  • Takahiro Moriyama, Kyosuke Yoshimi, Mi Zhao, Tiffany Masnou, Tomohiro Yokoyama, Junya Nakamura, Hirokazu Katsui, Takashi Goto: "Room-temperature fracture toughness of MoSiBTiC alloys", Intermetallics, 84 (2017), 92–102.
    (DOI: 10.1016/j.intermet.2017.01.004)
  • N. Matsuzaki, K. Ikeda, S. Miura, N. Sekido, T. Ohmura: "The evaluation of the composition dependence of fracture toughness of Al3Nb alloys by using micro-size fracture testing", MRS Advances, 2(26) (2017) 1405-1410.
    (DOI: 10.1557/adv.2017.167)
  • N. Sekido, T. Ohmura, K. Tsuzaki: "Application of Radio Frequency Glow Discharge Sputtering for Nanoindentation Sample Preparation", Journal of Materials Engineering and Performance, 26(3) (2017), 1245-1250.
    (DOI: 10.1007/s11665-017-2521-1)
  • 吉見享祐: "高強度・高靱性で高耐熱性の超モリブデン合金", 化学工業, 68(1) (2017), 1-7.

2016

  • 関戸信彰, 紙川尚也, 津﨑兼彰, 大村孝仁, 原徹, 宮本吾郎, 古原忠: "低炭素鋼中に相界面析出したVCナノ析出物の三次元観察", まてりあ(日本金属学会報), 55(12) (2016), 593.
    N. Sekido, N. Kamikawa, K. Tsuzaki, T. Ohmura, T. Hara, G. Miyamoto, T. Furuhara: "3D Observation on Nano-sized VC Precipitates Formed in a Low Carbon Steel through Interphase Precipitation", Materia Japan, 55(12) (2016), 593.
    (DOI: 10.2320/materia.55.593)
  • Kouichi Maruyama, Junya Nakamura, Kyosuke Yoshimi, Yuji Nagae: "EVALUATION OF LONG-TERM CREEP RUPTURE LIFE OF GR.91 STEEL BY ANALYSIS OF ON-GOING CREEP CURVES", Proceedings from the Eighth International Conference (Advances in Materials Technology for Fossil Power Plants), Ed.by J. Shingledecker, J. Siefert, J. Parker, the Electric Power Research Institute (EPRI) and ASM International, Almere, Flevoland, (2016), 466-477.
  • 鎌田詩歩, 吉見享祐: "第1世代MoSiBTiC合金の引張クリープ挙動", 日本学術振興会耐熱金属材料第123委員会研究報告, 57(3) (2016), 256-265.
  • 山形遼介, 吉見享祐: "Fe-Cr-Al-Nb-W合金中のFe2(Nb, W)Laves 相形成に対するNb/W比の影響", 日本金属学会誌, 80(10) (2016), 646-654.
    Ryosuke Yamagata and Kyosuke Yoshimi: "Effect of Nb/W Ratio on Fe2 (Nb, W) Laves Phase Formation in Fe-Cr-Al-Nb-W Alloy", J. Japan Inst. Met. Mater., 80(10) (2016), 646-654.
    (DOI: 10.2320/jinstmet.J2016027)
  • Junya Nakamura, Daiki Kanekon, Kyosuke Yoshimi: "Characterization of Mo/Mo2C interface in MoSiBTiC alloy", Materials Letters, 180 (2016), 340–343.
    (DOI: 10.1016/j.matlet.2016.04.133)
  • Yukiko Ogawa, Daisuke Ando, Yuji Sutou, Kyosuke Yoshimi, Junichi Koike: "Erratum to "Determination of ɑ/β phase boundaries and mechanical characterization of Mg-Sc binary alloys", Materials Science and Engineering A, 674 (2016), 713.
    (DOI: 10.1016/j.msea.2016.08.016)
  • Yukiko Ogawa, Daisuke Ando, Yuji Sutou, Kyosuke Yoshimi, Junichi Koike: "Determination of α/β phase boundaries and mechanical characterization of Mg-Sc binary alloys", Materials Science & Engineering A, 670 (2016), 335–341.
    (DOI: 10.1016/j.msea.2016.06.028)
  • 上村宗二朗, 山室賢輝, 金正旭, 森園靖浩, 連川貞弘, 吉見享祐: "アーク溶解・傾角鋳造法で作製したMo-Si-B-TiC 合金の微細組織の定量評価", 日本金属学会誌, 80(8) (2016), 529-538.
    Sojiro Uemura, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa and Kyosuke Yoshimi: "Quantitative Evaluation of Microstructure in Mo-Si-B-TiC Alloy Produced by Melting and Tilt Casting Methods", J. Japan Inst. Met. Mater., 59(1) (2016), 136-145.
    (DOI: 10.2320/jinstmet.J2016010)
  • K. Maruyama, J. Nakamura and K. Yoshimi: "Assessment of Long-Term Creep Rupture Strength of T91 Steel by Multiregion Rupture Data Analysis", Journal of Pressure Vessel Technology, Transactions of the ASME, 138(3) (2016), 031407.
    (DOI: 10.1115/1.4032647)
  • N. Takata, N. Sekido, M. Takeyama, J.H. Perepezko, M. Follett-Figueroa, C. Zhang: "Solidification of Bcc/T1/T2 three-phase microstructure in Mo–Nb–Si–B alloys", Intermetallics, 72 (2016), 1-8.
    (DOI: 10.1016/j.intermet.2016.01.001)
  • 中山俊一, 吉見享祐: "ZrC添加したMo-Si-B合金の高温圧縮強度と室温破壊靱性", 日本学術振興会耐熱金属材料第123委員会研究報告, 57(1) (2016), 93-102.
  • 山本詩歩, 吉見享祐, 金正旭, 横山健太郎: "TiC添加したMo-Si-B合金の高温強度に及ぼすミクロ組織の影響", 日本金属学会誌, 80(1) (2016), 51-59.
    Shiho Yamamoto, Kyosuke Yoshimi, Joungwook Kim and Kentaro Yokoyama: "Effects of Microstructure on High-Temperature Strength of TiC-Added Mo-Si-B Alloys", J. Japan Inst. Met. Mater., 80(1) (2016), 51-59.
    (DOI: 10.2320/jinstmet.JB201504)
  • 中山俊一, 吉見享祐: "鋳造法によって作製されたZrC添加Mo-Si-B合金のミクロ組織と機械的性質", 日本金属学会誌, 80(1) (2016), 92-101.
    Shunichi Nakayama and Kyosuke Yoshimi: "Microstructure and Mechanical Properties of the ZrC-Added Mo-Si-B Alloys Prepared by Arc-Melting", J. Japan Inst. Met. Mater., 80(1) (2016), 92-101.
    (DOI: 10.2320/jinstmet.JB201505)

2015

  • Kyosuke Yoshimi, Daiki Kanekon, Shiho Yamamoto, Joung-Wook Kim, Junya Nakamura and Kouichi Maruyama, "TENSILE CREEP PROPERTIES OF TiC-ADDED Mo-Si-B ALLOYS IN THE ULTRAHIGH TEMPERATURE REGION", 123rd Committee on Heat Resisting Materials and Alloys, (2015), 350-353.
  • Kyosuke Yoshimi, Takafumi Iizawa, Shiho Yamamoto, Junya Nakamura, Kouichi Maruyama, Hirokazu Katsui and Takashi Goto: "Phase Stability, Microstructure and Ultrahigh-Temperature Strength of Mo-Si-B-Based Alloys for the Applications in Uncooling Turbine Systems", Proceedings of International Gas Turbine Congress 2015 Tokyo, Gas Turbine Society of Japan (GTSJ), Shinjuku, Tokyo, (2015), 319-327.
  • K. Maruyama, J. Nakamura, K. Yoshimi, "Prediction of Long-Term Creep Rupture Life of Grade 122 Steel by Multiregion Analysis", Transactions of ASME, Journal of Pressure Vessel Technology, 137 (2015), 021403-1-021403-5.
    (DOI: 10.1115/1.4028203)
  • 丸山公一, 中村純也, 吉見享祐: "領域区分解析によるT91鋼のクリープ破断強度評価", 日本学術振興会耐熱金属材料第123委員会研究報告, 56(3) (2015), 173-183
  • 束村基行, 吉見享祐, 毛利哲夫: "第一原理クラスター変分法によるNi3Alの熱膨張係数および体積弾性率の温度依存性のシミュレーション", 日本学術振興会耐熱金属材料第123委員会研究報告, 56(3) (2015), 207-216.
  • Joung Wook Kim, Kyosuke Yoshimi, Hirokazu Katsui and Takashi Goto: "Effect of Ti addition on density and microstructure development of MoSiBTiC alloy", MRS SYMPOSIUM PROCEEDINGS 2014, Ed.by M. Heilmaier, I. Baker, K. Kishida, M. Mills, S. Miura, Materials Research Society (MRS), Warrendale, PA, 1760 (2015), 73-78.
    (DOI: 10.1557/opl.2015.8)
  • Yutaka Yoshida, Seiichi Watanabe, Hideo Kaiju, Junji Nishii, and Kyosuke Yoshimi: "Wavelength-dependent magnetic transitions of self-organized iron–aluminum stripes induced by pulsed laser irradiation", Journal of Applied Physics, 117 (2015), 045305.
    (DOI: 10.1063/1.4906523)

2014

  • Takako Naganuma, Wataru Hoshino, Yukihiro Shikanai, Rie Sato, Kaiyue Liu, Saho Sato, Koji Muramoto, Makoto Osada, Kyosuke Yoshimi, Tomohisa Ogawa: "Novel Matrix Proteins of Pteria penguin Pearl Oyster Shell Nacre Homologous to the Jacalin-Related β-Prism Fold Lectins", PLOS ONE, 9(11) (2014), e112326.
    (DOI: 10.1371/journal.pone.0112326)
  • 山形遼介, 吉見享祐: "Al含有フェライト系耐熱鋼に晶出するLaves相の元素分配挙動とミクロ組織の発達過程", 日本学術振興会耐熱金属材料第123委員会研究報告, 55(3) (2014), 257-263.
  • 丸山公一, 藤原雅美, 吉見享祐: "基礎から学ぶ構造金属材料学", 内田老鶴圃,(2014)
  • KYOSUKE YOSHIMI, JUNYA NAKAMURA, DAIKI KANEKON, SHIHO YAMAMOTO, KOUICHI MARUYAMA, HIROKAZU KATSUI, and TAKASHI GOTO: "High-Temperature Compressive Properties of TiC-Added Mo-Si-B Alloys", JOM, 66(9) (2014), 1930-1938.
    (DOI: 10.1007/s11837-014-1097-6)
  • Dai-Xiu Wei, Yuichiro Koizumi, Hiroaki Nishiyama, Akinori Yamanaka, Masahiko Yoshino, Shinpei Miyamoto, Kyosuke Yoshimi, Akihiko Chiba: "Nanoplastic deformation on Ti–39 at.% Al single crystals for manipulation of every single γ lamella", Acta Materialia, 76 (2014), 331-341.
    (DOI: 10.1016/j.actamat.2014.05.031)
  • 中村純也, 森山貴裕, 金今大樹, 丸山公一, 吉見享祐: "Mo-Si-B三元系合金の高温強度と変形組織に対する合金組成の影響", 日本学術振興会耐熱金属材料第123委員会研究報告, 55(2) (2014), 165-172.
  • Junya Nakamura, Takahiro Kaneko, Takashi Hara, Kyosuke Yoshimi, Kouichi Maruyama, Hirokazu Katsui, Takashi Goto: "Site-occupation behavior and solid-solution hardening effect of rhenium in Mo5SiB2", Intermetallics, 53 (2014), 85–91.
    (DOI: 10.1016/j.intermet.2014.04.009)
  • Mi Zhao, Kyosuke Yoshimi, Junya Nakamura, Kunio Yubuta and Takamasa Sugawara: "High-temperature elastic anisotropy of B2-type FeAl", Scripta Materialia, 82 (2014), 37–40.
    (DOI: 10.1016/j.scriptamat.2014.03.016)
  • 金子昂弘, 中村純也, 吉見享祐, 丸山公一: "Mo5SiB2中のTiのサイト占有挙動", 日本学術振興会耐熱金属材料第123委員会研究報告, 55(1) (2014), 55-62.
  • 森山貴裕, 中村純也, 吉見享祐, 丸山公一: "第1世代モシブチック合金の室温破壊靭性", 日本学術振興会耐熱金属材料第123委員会研究報告, 55(1) (2014), 63–72.
  • 丸山公一, 中村純也, 吉見享祐: "高クロムフェライト鋼のクリープ破断時間における温度依存性の変化", 鉄と鋼, 100(3) (2014), 84-90.
    Kouichi Maruyama, Junya Nakamura and Kyosuke Yoshimi: "Change in Temperature Dependence of Creep Rupture Life of High Cr Ferritic Steel", Tetsu-to-Hagané, 100(3) (2014), 84-90.
    (DOI: 10.2355/tetsutohagane.100.414)
  • H. Kaiju, Y. Yoshida, S. Watanabe, K. Kondo, A. Ishibashi, and K. Yoshimi: "Magnetic properties on the surface of FeAl stripes induced by nanosecond pulsed laser irradiation", Journal of Applied Physics, 115 (2014), 17B901.
    (DOI: 10.1063/1.4862376)
  • Seong-Ho Ha, Kyosuke Yoshimi, Junya Nakamura, Takahiro Kaneko, Kouichi Maruyama, Rong Tu and Takashi Goto: "Experimental Study of Moss-T2, Moss-Mo3Si-T2, and Mo3Si-T2 Eutectic Reactions in Mo-rich Mo-Si-B Alloys", Journal of Alloys and Compounds, 594 (2014), 52-59.
    (DOI: 10.1016/j.jallcom.2014.01.089)
  • Mi Zhao, Kyosuke Yoshimi, Kouichi Maruyama, Kunio Yubuta: "Thermal vacancy behavior analysis through thermal expansion, lattice parameter, and elastic modulus measurements of B2-type FeAl", Acta Materialia, 64 (2014), 382-390.
    (DOI: 10.1016/j.actamat.2013.10.051)
  • SHIMPEI MIYAMOTO, KYOSUKE YOSHIMI, SEONG-HO HA, TAKAHIRO KANEKO, JUNYA NAKAMURA, TETSUYA SATO, KOUICHI MARUYAMA, RONG TU and TAKASHI GOTO: "Phase Equilibria, Microstructure, and High Temperature Strength of TiC-Added Mo-Si-B Alloys", Metallurgical and Materials Transactions A, 45 (2014), 1112-1123.
    (DOI: 10.1007/s11661-013-1779-7)
  • Takaomi Itoi, Tomoaki Sudo, Kyosuke Yoshimi: "Evaluation of tool performance of recycle-type Fe3Al based alloy for pure Cu", Materials Science Forum, 783-786 (2014), 1142-1146.
    (DOI: 10.4028/www.scientific.net/MSF.783-786.1142)
  • K. Maruyama, J. Nakamura, K. Yoshimi: "Evaluation of long-term creep rupture life of strength enhanced high Cr ferritic steel on the basis of its temperature dependence", Proceedings from the Seventh International Conference (Advances in Materials Technology for Fossil Power Plants), Ed.by D. Gandy, J. Shingledecker, ASM International, Almere, Flevoland, (2014), 732-743.
  • Mayumi Suzuki, Yasuyuki Murata, Kyosuke Yoshimi: "High temperature creep behavior and effects of stacking fault energy in Mg-Y and Mg-Y-Zn dilute solid solution alloys", Materials Science Forum, 783-786 (2014), 491-496.
    (DOI: 10.4028/www.scientific.net/msf.783-786.491)

2013

  • 御手洗容子, 吉見享祐, 細田秀樹, 中野貴由: "国民との対話のための公開講演会「グリーン・ライフイノベーションへの材料研究最前線」を開催して", まてりあ(日本金属学会報), 52(1) (2013), 32-35.
    (DOI: 10.2320/materia.52.32)
  • Yutaka Yoshida, Kazuya Oosawa, Seiichi Watanabe, Hideo Kaiju, Akira Ishibashi, and Kyosuke Yoshimi: "Nanopatterns induced by pulsed laser irradiation on the surface of an Fe-Al alloy and their magnetic properties", Applied Physics Letters, 102(18) (2013), 183109.
    (DOI: 10.1063/1.4804363)
  • 中村純也, 原崇, 金子昂弘, 吉見享祐, 丸山公一: "Mo5SiB2相の相安定性に対するRe添加の効果", 日本学術振興会耐熱金属材料第123委員会研究報告, 54(2) (2013), 183-191.
  • Mi Zhao, Kyosuke Yoshimi, Kouichi Maruyama, Kunio Yubuta: "Thermal Vacancy Behavior Analysis through Thermal Expansion, Lattice Parameter and Elastic Modulus Measurements of B2-type FeAl", Acta Materialia, 54(2) (2013), 193-206.
    (DOI: 10.1016/j.actamat.2013.10.051)
  • 丸山公一, 中村純也, 吉見享祐: "先進高クロムフェライト鋼のクリープ破断時間における温度依存性の変化", 日本学術振興会耐熱金属材料第123委員会研究報告, 54(3) (2013), 255-264.
  • 吉見享祐, 中村純也, 森山貴裕, 宮本慎平, 金子昂弘, 金今大樹, 丸山公一: "第一世代モシブチック合金の高温強度と室温破壊靱性", 日本学術振興会耐熱金属材料第123委員会研究報告, 54(3) (2013), 293-301.
  • Mi Zhao, Kyosuke Yoshimi, Kouichi Maruyama and Kunio Yubuta: "Role of Thermal Vacancies on Temperature Dependence of Lattice Parameter and Elastic Moduli in B2-type FeAl", Intermetallic-Based Alloys-Science, Technology and Applications (MRS SYMPOSIUM PROCEEDINGS 2012), Ed.by Ian Baker, Martin Heilmaier, Sharvan Kumar, Kyosuke Yoshimi, Materials Research Society (MRS), Warrendale, PA, 1516 (2013), 169-175.
    (DOI: 10.1557/opl.2012.1682)
  • Ian Baker, Martin Heilmaier, Sharvan Kumar, Kyosuke Yoshimi: "Intermetallic-Based Alloys-Science, Technology and Applications: Preface", Intermetallic-Based Alloys-Science, Technology and Applications (MRS Symposium Proceedings 2012), Ian Baker, Martin Heilmaier, Sharvan Kumar, Kyosuke Yoshimi, Materials Research Society (MRS), Warrendale, PA, 1516 (2013).
    (DOI: 10.1557/opl.2013.437)

2012

  • 宮本慎平, 佐藤徹也, 河星鎬, 吉見享祐, 丸山公一: "三相共晶反応を利用したMo-Mo5SiB2-TiC合金の組織制御", 日本学術振興会耐熱金属材料第123委員会研究報告, 53(1) (2012), 51-58.
  • 吉見享祐, 細田秀樹, 中野貴由: "構造用金属間化合物研究から派生した様々な新しい研究展開~新構造用材料から生体材料・生体組織研究まで~", まてりあ(日本金属学会報), 51(4) (2012), 168-178.
    (DOI: 10.2320/materia.51.168)
  • Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama, Rong Tu, Takashi Goto: "Compositional Regions of Single Phases at 1800℃ in Mo-rich Mo-Si-B Ternary System", Materials Science and Engineering A, 552 (2012), 179-188.
    (DOI: 10.1016/j.msea.2012.05.028)
  • 篠崎一平, 吉見享祐, 丸山公一, 長谷川泰士: "電磁超音波共鳴法によって測定された弾性定数およびその温度依存性の最適化", 日本学術振興会耐熱金属材料第123委員会研究報告, 53(2) (2012), 141-150.
  • 河星鎬, 吉見享祐, 丸山公一, 中村純也, 金子昂弘, 塗溶, 後藤孝: "電子プローブマイクロアナライザの定量性改善によるMo-Si-B合金の液相投影図ならびに状態図の再検討", 日本学術振興会耐熱金属材料第123委員会研究報告, 53(2) (2012), 151-162.
  • Yuya Miyazaki, Shimpei Miyamoto, Kyosuke Yoshimi, Kouichi Maruyama: "Novel Low-Temperature Solid-Carburizing Using C60 Fullerene for Austenitic Stainless steel SUS316L", ISIJ International, 52(11) (2012), 2076-2082.
    (DOI: 10.2355/isijinternational.52.2076)

2011

  • Kyosuke Yoshimi, Seong-Ho Ha, Kouichi Maruyama, Rong Tu and Takashi Goto: "Microstructural Evolution of Mo-Si-B Ternary Alloys Through Heat Treatment at 1800℃", Advanced Materials Research, 278 (2011), 527-532.
    (DOI: 10.4028/www.scientific.net/AMR.278.527)
  • M. Palm, B. Bewlay, S. Kumar, K. Yoshimi: "Materials Research Society Symposium: Preface", Intermetallic-Based Alloys for Structural and Functional Applications (MRS SYMPOSIUM PROCEEDINGS 2010), Ed.by Martin Palm, Bernard P. Bewlay, K. Sharvan Kumar, Kyosuke Yoshimi, Materials Research Society (MRS), Warrendale, PA, 1295 (2011).
  • Kyosuke Yoshimi, Masafumi Tsunekane and Kouichi Maruyama: "Analysis of vacancy agglomeration processes by Matusita's method for B2 FeAl", Intermetallic-Based Alloys for Structural and Functional Applications (MRS SYMPOSIUM PROCEEDINGS 2010), Ed.by Martin Palm, Bernard P. Bewlay, K. Sharvan Kumar, Kyosuke Yoshimi, Materials Research Society (MRS), Warrendale, PA, 1295 (2011) 177-182.
    (DOI: 10.1557/opl.2011.528)

2010

  • A. Yamauchi, M. Tsunekane, Kazuya Kurokawa, Shuji Hanada, KyosukeYoshimi: "Influence of vacuum annealing conditions on the surface oxidation and vacancy condensation in the surface of an FeAl single crystal", Intermetallics, 18(4) (2010), 412-416.
    (DOI: 10.1016/j.intermet.2009.08.014)
  • T. Itoi, Y. Watanabe, Y. Nishikawa, H. Kimura, K. Yoshimi, M. Hirohashi: "Preparation of recycle-typed Fe3Al alloy and its application for cutting tool materials", Intermetallics, 18(7) (2010), 1396-1400.
    (DOI: 10.1016/j.intermet.2010.01.030)
  • Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama, Rong Tu and Takashi Goto: "Phase Formation and Solidification Routes Near Mo-Mo5SiB2 Eutectic Point in Mo-Si-B System", Materials Transactions, 51(9) (2010), 1699-1704.
    (DOI: 10.2320/matertrans.M2010153)
  • R. P. Chen, H. Ghassemi Armaki, 吉見享祐, 丸山公一, 南雄介, 五十嵐正晃: "改良9Cr-1Mo鋼での早期クリープ破断と破断時間の過大評価", 鉄と鋼, 96(9) (2010), 564-571.
    R.P. Chen, H. Ghassemi Armaki, Kyosuke Yoshimi, Kouichi Maruyama, Yusuke Minami, Masaaki Igarashi: "Premature Creep Rupture and Overestimation of Rupture Life in Modified 9Cr-1Mo Steel", Tetsu-to-Hagané, 96(9) (2010), 564-571.
    (DOI: 10.2355/tetsutohagane.96.564)
  • T. Itoi, S. Mineta, H. Kimura, K. Yoshimi, M. Hirohashi: "Fabrication and wear properties of Fe3Al-based composites", Intermetallics, 18(11) (2010), 2169-2177.
    (DOI: 10.1016/j.intermet.2010.07.014)
  • Kyosuke Yoshimi, Masafumi Tsunekane, Kouichi Maruyama: "Differential scanning calorimetry study on annihilation behavior of supersaturated thermal vacancies in B2-type FeAl", Intermetallics, 18(7) (2010), 1265–1272.
    (DOI: 10.1016/j.intermet.2010.02.019)
  • K. Maruyama, H. Ghassemi Armaki, R.P. Chen, K. Yoshimi, M. Yoshizawa, M. Igarashi: "Cr concentration dependence of overestimation of long term creep life in strength enhanced high Cr ferritic steels", International Journal of Pressure Vessels and Piping, 87(6) (2010), 276-281.
    (DOI: 10.1016/j.ijpvp.2010.03.012)
  • K. Maruyama, A. Tabata, Y. Toriyama, M. Suzuki and K. Yoshimi: "Effects of lamellar thickness on misfit dislocation introduction and mechanical properties of γ/α2 nano-lamellar TiAl alloys", Journal of Physics: Conference Series, 240 (2010), 12101.
    (DOI: 10.1088/1742-6596/240/1/012101)

2009

  • J. Saida, H. Kato, A.D. Setyawan, K. Yoshimi, A. Inoue: "Nanostructure controlling in Zr-based metallic glasses using icosahedral local structure", Journal of Alloys and Compounds, 483(1-2) (2009), 231-234.
    (DOI: 10.1016/j.jallcom.2008.07.182)
  • Hyeon-Taek Son, Jae-Seol Lee, Dae-Guen Kim, Kyosuke Yoshimi, Kouichi Maruyama: "Effects of samarium (Sm) additions on the microstructure and mechanical properties of as-cast and hot-extruded Mg-5 wt%Al-3 wt%Ca-based alloys", Journal of Alloys and Compounds, 473(1–2) (2009), 446–452.
    (DOI: 10.1016/j.jallcom.2008.06.016)
  • K. Maruyama, K. Yoshimi, Y. Hasegawa, H. Morimoto and F. Masuyama: "Temperature and stress dependence of creep life of welded joints in strength enhanced high cr ferritic steels", Energy Materials: Materials Science and Engineering for Energy Systems, 4(2) (2009), 70-75.
    (DOI: 10.1179/174892310X12811032100150)
  • M. Tsunekane, K. Yoshimi, K. Maruyama: "Heat treatment effects on self-assembling process of supersaturated thermal vacancies in B2-type FeAl and NiAl", Proceedings of the 17th IFHTSE Congress, The Japan Society for Heat Treatment (JSHT), Tokyo, Japan, 1 (2009), 292-295.
  • Yoshimi Kyosuke, Ohba Tatsuo, Maruyama Kouichi: "Carbon coatings on iron substrate produced by plasma spraying using fullerene granules", Proceedings of the 17th IFHTSE Congress, The Japan Society for Heat Treatment (JSHT), Tokyo, Japan, 1 (2009), 225-228.
  • Kyosuke Yoshimi, Yusuke Kondo and Kouichi Maruyama: "Effect of particle size of Mo solid solution on hardness of Mo5SiB2/Mo-based alloys", Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications (MRS SYMPOSIUM PROCEEDINGS 2008), Ed.by Martin Palm, Bernard P. Bewlay, Yue-Hui He, Masao Takeyama, Jörg M.K. Wiezorek, Materials Research Society (MRS), Warrendale, PA, 1128 (2009), 431-436.
    (DOI: 10.1557/proc-1128-u07-08)

2008

  • Masafumi Tsunekane, Kyosuke Yoshimi, Kouichi Maruyama: "Self-assembling behavior of supersaturated thermal vacancies in FeAl single-crystal", Acta Materialia, 56(13) (2008), 3162–3168.
    (DOI: 10.1016/j.actamat.2008.03.002)
  • Hyeon-Taek Son, Jae-Seol Lee, Chang-Seog Kang, Jung-Chan Bae, Kyosuke Yoshimi, Kouichi Maruyama: "The Effects of Yttrium Element on Microstructure and Mechanical Properties of Mg-5 mass%Al-3 mass%Ca Based Alloys Fabricated by Gravity Casting and Extrusion Process", MATERIALS TRANSACTIONS, 49(5) (2008), 945-951.
    (DOI: 10.2320/matertrans.MC200777)
  • Hyeon-Taek Son, Jae-Seol Lee, Ik-Hyun Oh, Dae-Guen Kim, Kyosuke Yoshimi, Kouichi Maruyama: "Microstructure and Mechanical Properties of Mg-Al-Ca-Nd Alloys Fabricated by Gravity Casting and Extrusion Process", MATERIALS TRANSACTIONS, 49(5) (2008), 1025-1031.
    (DOI: 10.2320/matertrans.MC200774)
  • Kouichi Maruyama, Kyosuke Yoshimi: "Methodology of creep data analysis for advanced high Cr ferritic steel", Proceedings of the ASME Pressure Vessels and Piping Conference (ASME Conference Proceedings 2007), American Society of Mechanical Engineers (AMSE), (2008), 631-636.
    (DOI: 10.1115/CREEP2007-26150)

2007

  • Akira Yamauchi, Kyosuke Yoshimi, Kazuya Kurokawa and Shuji Hanada: "Synthesis of Mo-Si-B in situ composites by mechanical alloying", Journal of Alloys and Compounds, 434-435 (2007), 420-423.
    (DOI: 10.1016/j.jallcom.2006.08.218)
  • Ryusuke Nakamura, Kyosuke Yoshimi, Sadahiro Tsurekawa: "Supersaturated vacancies and vacancy complexes in rapidly solidified B2 aluminide ribbons", Materials Science and Engineering A, 449–451 (2007), 1036-1040.
    (DOI: 10.1016/j.msea.2006.07.030)
  • 鳥山康成, 吉見享祐, 丸山公一: "完全層状組織TiAl合金におけるα2/γ界面への界面転位の導入と格子ミスフィット変化に及ぼすNbおよびZr添加の影響", 日本金属学会誌, 71(1) (2007), 96-102.
    Yasunari Toriyama, Kyosuke Yoshimi and Kouichi Maruyama: "Effects of Nb and Zr addition on introduction of misfit dislocations onto α2/γ lamellar boundaries and change of lattice misfit in fully lamellar TiAl alloy", Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 71(1) (2007), 96–102.
    (DOI: 10.2320/jinstmet.71.96)
  • Kouichi Maruyama, Hassan Ghassemi Armaki, Kyosuke Yoshimi: "Multiregion analysis of creep rupture data of 316 stainless steel", International Journal of Pressure Vessels and Piping, 84(3) (2007), 171–176.
    (DOI: 10.1016/j.ijpvp.2006.09.015)
  • Junji Saida, Hidemi Kato, Albertus Deny Heri Setyawan, Kyosuke Yoshimi and Akihisa Inoue: "Deformation-Induced Nanoscale Dynamic Transformation Studies in Zr-Al-Ni-Pd and Zr-Al-Ni-Cu Bulk Metallic Glasses", Materials Transactions, 48(6) (2007), 1327-1335.
    (DOI: 10.2320/matertrans.MF200615)
  • Kouichi Maruyama and Kyosuke Yoshimi: "Influence of Data Analysis Method and Allowable Stress Criterion on Allowable Stress of Gr.122 Heat Resistant Steel", J. Pressure Vessel Technol, 129(3) (2006), 449-453.
    (DOI: 10.1115/1.2748825)
  • Sachiko Fujisawa, Kyosuke Yoshimi, Hidemi Kato, Kouichi Maruyama: "Microstructure of rapidly solidified Co-Sn-Ti and Co-Sn-Si alloys", Materials Science Forum, 561-565(2) (2007), 1357-1360.
    (DOI: 10.4028/www.scientific.net/MSF.561-565.1357)
  • Hassan Ghassemi Armaki, Kyosuke Yoshimi, Kouichi Maruyama, Mitsuru Yoshizawa, Masaaki Igarashi: "Creep damage evaluation by hardness in advanced high Cr ferritic steels", Materials Science Forum, 561-565(3) (2007), 2217-2220.
    (DOI: 10.4028/www.scientific.net/MSF.561-565.2217)
  • Akira Ibano, Kyosuke Yoshimi, Akira Yamauchi, Rong Tu, Kouichi Maruyama, Kazuya Kurokawa, Takashi Goto: "High temperature oxidation behavior of MoSi2 in low pressure atmosphere", Materials Science Forum, 561-565(1) (2007), 427-430.
    (DOI: 10.4028/www.scientific.net/MSF.561-565.427)
  • Hyeon Taek Son, Jae Seol Lee, Ji Min Hong, Dae Guen Kim, Kyosuke Yoshimi, Kouichi Maruyama: "Microstructure and dynamic ultra-micro hardness of the as-cast and extruded Mg-Al-Ca-Sm alloys", Advanced Materials Research, 24-25 (2007), 153-156.
    (DOI: 10.4028/www.scientific.net/AMR.26-28.153)
  • Hyeon Taek Son, Jae Seol Lee, Ji Min Hong, Ik Hyun Oh, Kyosuke Yoshimi, Kouichi Maruyama: "Microstructure and mechanical properties of Mg-Al-Ca-Sm alloys at high temperature", Key Engineering Materials, 345-346(1) (2007), 653-656.
    (DOI: 10.4028/www.scientific.net/KEM.345-346.653)
  • Hyeon Taek Son, Jae Seol Lee, Young Kyun Kim, Ik Hyun Oh, Kyosuke Yoshimi, Kouichi Maruyama: "Effects of samarium on microstructure and mechanical properties of Mg-Al-Ca alloys", Materials Science Forum, 544-545 (2007), 295-298.
    (DOI: 10.4028/www.scientific.net/MSF.544-545.295)
  • Masafumi Tsunekane, Kyosuke Yoshimi and Kouichi Maruyama: "TEM Observation of Vacancy Clustering Process in FeAl Single Crystal", Advanced Intermetallic-Based Alloys (MRS SYMPOSIUM PROCEEDINGS 2006), J. Wiezorek, C.L. Fu, M. Takeyama, D. Morris, H. Clemens, Materials Research Society (MRS), Warrendale, PA, 980 (2007), 69-74.
    (DOI: 10.1557/PROC-980-0980-II05-11)
  • Masafumi Tsunekane, Kyosuke Yoshimi, Kouichi Maruyama: "Attempt to control spatial distribution of nano-gold particles using nanoporous surfaces of FeAl single crystal", Advanced Materials Research, 24-25 (2007), 185-188.
    (DOI: 10.4028/www.scientific.net/AMR.26-28.185)
  • Akira Yamauchi, Kyosuke Yoshimi, Yoshihiro Murakami, Kazuya Kurokawa, Shuji Hanada: "Oxidation behavior of Mo-Si-B In-situ composites", Solid State Phenomena, 127 (2007), 215-220.
    (DOI: 10.4028/www.scientific.net/SSP.127.215)
  • Kyosuke Yoshimi, Hidemi Kato, Junji Saida, Akihisa Inoue: "Room temperature plasticity of Zr65Al7.5Nl10Cu 17.5-xPdx bulk metallic glasses", Materials Science Forum, 539-543(2) (2007), 2054-2058.

2006

  • Ryusuke Nakamura, Kohta Asano, Kyosuke Yoshimi, Yoshiaki Iijima: "Thermal analysis of lattice defects in LaNi5", Journal of Alloys and Compounds, 413(1-2) (2006), 211-213.
    (DOI: 10.1016/j.jallcom.2005.03.112)
  • K. Yoshimi, M. Tsunekane, R. Nakamura, A. Yamauchi and S. Hanada: "Nanoscale surface self-patterning of FeAl single crystals by vacancy absorption process", APPLIED PHYSICS LETTERS, 89(7) (2006), 073110-1-073110-3.
    (DOI: 10.1063/1.2245215)

2005

  • KYOSUKE YOSHIMI, TAKAYUKI KOBAYASHI, AKIRA YAMAUCHI, TOMOHIDE HARAGUCHI and SHUJI HANADA: "Surface mesostructure change of B2-type FeAl single crystals by condensation of supersaturated thermal vacancies", Philosophical Magazine, 85(2-3) (2005), 331-344.
    (DOI: 10.1080/14786430412331315743)
  • T. Haraguchi, K. Yoshimi, M.H. Yoo, H. Kato, S. Hanada, A. Inoue: "Vacancy clustering and relaxation behavior in rapidly solidified B2 FeAl ribbons", Acta Materialia, 53(13) (2005), 3751-3764.
    (DOI: 10.1016/j.actamat.2005.04.027)
  • Kyosuke Yoshimi, Hidemi Kato, Junji Saida and Akihisa Inoue: "Characteristics of Shear Bands and Fracture Surfaces of Zr65Al7.5Ni10Pd17.5 Bulk Metallic Glass", Materials Transactions, 46(12) (2005), 2870-2874.
    (DOI: 10.2320/matertrans.46.2870)
  • Ryusuke Nakamura, Kyosuke Yoshimi, Akira Yamauchi and Shuji Hanada: "Thermal analysis of relaxation processes of supersaturated vacancies in B2-type aluminides", Intergrative and Inerdisciplinary Aspects of Intermetallics (MRS SYMPOSIUM PROCEEDINGS 2004), Ed.by Michael J. Mills, Haruyuki Inui, Helment Clemens, Chong-Long Fu, Materials Research Society (MRS), Warrendale, PA, 842 (2005), 535-540.
    (DOI: 10.1557/PROC-842-S5.15)
  • Akira Yamauchi, Kyousuke Yoshimi and Shuji Hanada: "High temperature oxidation behavior of Al added Mo / Mo5SiB2 in-situ composites", Intergrative and Inerdisciplinary Aspects of Intermetallics (MRS SYMPOSIUM PROCEEDINGS 2004), Ed.by Michael J. Mills, Haruyuki Inui, Helment Clemens, Chong-Long Fu, Materials Research Society (MRS), Warrendale, PA, 842 (2005), 315-320.
    (DOI: 10.1557/PROC-842-S5.34)
  • Kyosuke Yoshimi, Akira Yamauchi, Ryusuke Nakamura, Sadahiro Tsurekawa and Shuji Hanada: "Effect of heat treatments on microstructure of rapidly solidified TiCo ribbons", Intergrative and Inerdisciplinary Aspects of Intermetallics (MRS SYMPOSIUM PROCEEDINGS 2004), Ed.by Michael J. Mills, Haruyuki Inui, Helment Clemens, Chong-Long Fu, Materials Research Society (MRS), Warrendale, PA, 842 (2005), 449-454.
    (DOI: 10.1557/PROC-842-S1.5)
  • Kyosuke Yoshimi, Minseok Sung, Sadahiro Tsurekawa, Akira Yamauchi, Ryusuke Nakamura, Shuji Hanada, Koichi Kawahara, Tadao Watanabe: "Substructure development in rapidly solidified B2-type TiCo ribbons", Materials Science Forum, 475-479(1) (2005), 849-852.
    (DOI: 10.4028/www.scientific.net/MSF.475-479.849)

2004

  • Akira Yamauchi, Kyosuke Yoshimi, Tomohide Haraguchi and Shuji Hanada: "Surface Oxidation of Fe-48 mol%Al Single Crystal under a High Vacuum", Materials Transactions, 45(2) (2004), 365-368.
    (DOI: 10.2320/matertrans.45.365)
  • Kyosuke Yoshimi, Mayumi Shoji, Tomohisa Ogawa, Akira Yamauchi, Takako Naganuma, Koji Muramoto and Shuji Hanada: "Microstructure and Orientation Distribution of Aragonite Crystals in Nacreous Layer of Pearl Shells", Materials Transactions, 45(4) (2004), 999-1004.
    (DOI: 10.2320/matertrans.45.999)
  • Tomohide Haraguchi, Fuminobu Hori, Kyosuke Yoshimi, Shuji Hanada, Ryuichiro Oshima, Akihiro Iwase, Hitoshi Hashimoto: "Relaxation process in quenched-in vacancies during annealing in B2 FeAl single crystals", Materials Science Forum, 445-446 (2004), 99-101.
    (DOI: 10.4028/www.scientific.net/msf.445-446.99)

2003

  • N. Nomura, T. Suzuki, S. Nakatani, K. Yoshimi, S. Hanada: "Joining of oxidation-resistant Mo-Si-B multiphase alloy to heat-resistant Mo-ZrC in-situ composite", Intermetallics, 11(1) (2003), 51-56.
    (DOI: 10.1016/S0966-9795(02)00166-8)
  • ERI MIURA, KEN'ICHI OTA, KYOSUKE YOSHIMI AND SHUJI HANADA: "Internal-friction study of the interstitial-substitutional effect on the deformation behavior of Nb-O, Nb-Ta-O and Nb-Mo-O single crystals", PHIROSOPHICAL MAGAZINE, 83(20) (2003), 2343-2357.
    (DOI: 10.1080/0141861031000113334)
  • T. Haraguchi, K. Yoshimi, H. Kato, S. Hanada, A. Inoue: "Determination of density and vacancy concentration in rapidly solidified FeAl ribbons", Intermetallics, 11(7) (2003), 707-711.
    (DOI: 10.1016/S0966-9795(03)00066-9)
  • N. Nomura, T. Suzuki, K. Yoshimi, S. Hanada: "Microstructure and oxidation resistance of a plasma sprayed Mo-Si-B multiphase alloy coating", Intermetallics, 11(7) (2003), 735-742.
    (DOI: 10.1016/S0966-9795(03)00069-4)
  • K. Yoshimi, S. Nakatani, N. Nomura, S. Hanada: "Thermal expansion, strength and oxidation resistance of Mo/Mo5SiB2 in-situ composites at elevated temperatures", Intermetallics, 11(8) (2003), 787-794.
    (DOI: 10.1016/S0966-9795(03)00073-6)
  • S. Hanada, T. Ozaki, E. Takahashi, S. Watanabe, K. Yoshimi, T. Abumiya: "Composition dependence of Young's modulus in beta titanium binary alloys", Materials Science Forum, 426-432(4) (2003), 3103-3108.
    (DOI: 10.4028/www.scientific.net/msf.426-432.3103)
  • Minseok Sung, Tomohide Haraguchi, Kyosuke Yoshimi, Shuji Hanada: "Effect of excess vacancies on hydrogen absorption-desorption characteristics in rapidly solidified B2 TiCo", Materials Science Forum, 426-432(4) (2003), 3727-3732.
    (DOI: 10.4028/www.scientific.net/msf.426-432.3727)
  • T. Haraguchi, K. Yoshimi, H. Kato, S. Hanada, A. Inoue: "Nanopore formation in B2 iron aluminide by vacancy clustering", Surface Engineering: In Materials Science Ⅱ, Ed.by S. Seal, N.B. Dahotre, J. Moore, S. Suryanarayana and A. Agarwal, The Minerals, Metals & Materials Society (TMS), Warrendale, PA, (2003), 111-120.
  • Tomohide Haraguchi, Kyosuke Yoshimi, Man H. Yoo, Hidemi Kato, Shuji Hanada and Akihisa Inoue: "Nanoporous Behavior Induced by Excess Vacancy Clustering in Rapidly-Solidified B2 FeAl Ribbons", Defect Properties and Related Phenomena in Intermetallic Alloys (MRS SYMPOSIUM PROCEEDINGS 2002), Ed.by Easo P. George, Haruyuki Inui, Michael J. Mills, Gunther Eggeler, Materials Research Society (MRS), Warrendale, PA, 753 (2003), 273-278.
    (DOI: 10.1557/PROC-753-BB5.14)
  • Kyosuke Yoshimi, Tomohide Haraguchi, Tomohisa Ogawa, Takayuki Kobayashi, Min-Seok Sung and Shuji Hanada: "Nanostructure of surface formed by vacancy clustering in FeAl", MRS SYIMPOSIUM PROCEEDINGS 2003, Materials Research Society (MRS), Warrendale, PA, 775 (2003), 307-312.
    (DOI: 10.1557/proc-775-p9.49)

2002

  • K. Yoshimi, S. Nakatani, T. Suda, S. Hanada, H. Habazaki: "Oxidation behavior of Mo5SiB2-based alloy at elevated temperatures", Intermetallics, 10(5) (2002), 407-414.
    (DOI: 10.1016/S0966-9795(02)00013-4)
  • Kyosuke Yoshimi, Shinya Nakatani, Shuji Hanada, Se-Hyun Ko, Yong-Ho Park: "Synthesis and high temperature oxidation of Mo-Si-B-O pseudo in situ composites", Science and Technology of Advanced Materials, 3(2) (2002), 181-192.
    (DOI: 10.1016/S1468-6996(02)00015-3)
  • K. Yoshimi, M.H. Yoo, A.A. Wereszczak, S.M. Borowicz, E.P. George, E. Miura, S. Hanada: "Deformation behavior of Mo5Si3 single crystal at high temperatures", Materials Science and Engineering A, 329-331 (2002), 228-234.
    (DOI: 10.1016/S0921-5093(01)01578-7)
  • E. Miura, K. Yoshimi, S. Hanada: "Oxygen-molybdenum interaction with dislocations in Nb-Mo single crystals at elevated temperatures", Acta Materialia, 50(11) (2002), 2905-2916.
    (DOI: 10.1016/S1359-6454(02)00115-5)
  • Kyosuke Yoshimi, Shuji Hanada, Tomohide Haraguchi, Hidemi Kato, Takaomi Itoi and Akihisa Inoue: "Nanoporous Surfaces of FeAl Formed by Vacancy Clustering", Materials Transactions, 43(11) (2002), 2897-2902.
    (DOI: 10.2320/matertrans.43.2897)

2001

  • K. Yoshimi, M.H. Yoo, A.A. Wereszczak, S.M. Borowicz, E.P. George, and R.H. Zee: "Yielding and flow behavior of Mo5Si3 single crystals", Scripta Materialia, 45(11) (2001), 1321-1326.
    (DOI: 10.1016/S1359-6462(01)01170-8)
  • Yûetsu Danzaki, Kazuaki Wagatsuma, Tsutomu Syoji, Kyosuke Yoshimi: "Dissolution of molybdenum-silicon (-boron) alloys using a mixture of sulfuric, nitric and hydrofluoric acids and a sequential correction method for ICP-AES analysis", Fresenius Journal of Analytical Chemistry, 369(2) (2001), 184-186.
    (DOI: 10.1007/s002160000616)
  • E. MIURA, K. YOSHIMI and S. HANADA: "Solid-Solution Strengthening by Oxygen in Nb-Ta and Nb-Mo Single Crystals", physica status solidi (a), 185(2) (2001), 357-372.
    (DOI: 10.1002/1521-396X (200106)185:2<357::AID-PSSA357>3.0.CO;2-9)

2000

  • N. NOMURA, K. YOSHIMI, T. KONNO, S. HANADA: "Fracture toughness improvement of TiC by Nb and Mo precipitates", JOURNAL OF MATERIALS SCIENCE LETTERS, 19(21) (2000), 1879-1881.
    (DOI: 10.1023/A:1006735624221)
  • M.H. Yoo, K. Yoshimi: "empirical model for ideal work of adhesion: transition-metal aluminides and silicides", Intermetallics, 8(9-11) (2000), 1215-1224.
    (DOI: 10.1016/S0966-9795(00)00082-0)
  • Teppei Suzuki, Naoyuki Nomura, Kyosuke Yoshimi and Shuji Hanada: "Microstructure and Creep of Mo-ZrC In-situ Composite", Materials Transactions, JIM, 41(9) (2000), 1164-1167.
    (DOI: 10.2320/matertrans1989.41.1164)
  • Naoyuki Nomura, Kyosuke Yoshimi and Shuji Hanada: "Mechanical Properties of Mo-Nb-TiC In-situ Composites Synthesized by Hot-Pressing", Materials Transactions, JIM, 41(12) (2000), 1599-1604.
    (DOI: 10.2320/matertrans1989.41.1599)
  • 鈴木哲平, 野村直之, 吉見享祐, 花田修治: "過共晶組織を有するMo-ZrC in-situ複合材料の高温強度と室温靭性", 日本金属学会誌, 64(11) (2000), 1082-1088.
    Teppei Suzuki, Naoyuki Nomura, Kyosuke Yoshimi and Shuji Hanada: "High-temperature strength and room-temperature fracture toughness of Mo-ZrC in-situ composites with hyper-eutectic structure", Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 4(11) (2000), 1082-1088.
    (DOI: 10.2320/jinstmet1952.64.11_1082)
  • Hideki Hosoda, Kyosuke Yoshimi, Shuji Miyazaki, Sadao Watanabe, Shuji Hanada: "Mechanical properties and oxidation resistance of Ir-added FeAl alloys", Proceedings of the International Symposium (Iridium), Ed.by Evan K. Ohriner, Richard D. Lanam, Peter Panfilov, and Hiroshi Harada, The Minerals, Metals & Materials Society (TMS), Warrendale, PA, (2000), 295-301.

1999

  • Eri Miura, Kyosuke Yoshimi and Shuji Hanada: "Effect of Oxygen on Yield Stress and Slip Plane in Nb, Nb-Ta and Nb-Mo Single Crystals", Materials Transactions, JIM, 40(5) (1999), 365-368.
    (DOI: 10.2320/matertrans1989.40.365)
  • M.H. YOO, K. YOSHIMI and S. HANADA: "DISLOCATION STABILITY AND DEFORMATION MECHANISMS OF IRON ALUMINIDES AND SILICIDE", Acta Materialia, 47(13) (1999), 3579-3588.
    (DOI: 10.1016/S1359-6454(99)00221-9)
  • M. H. Yoo and K. Yoshimi: "Ideal Cleavage Fracture of Transition-Metal Suicides: A Comparison Analysis", High-Temperature Ordered Intermetallic Alloys VIII (MRS Symposium Proceedings), Ed.by Easo P. George, Michael J. Mills, Masaharu Yamaguchi, Materials Research Society (MRS), Warrendale, PA, 552 (1999), KK6.6.1-KK6.6.6.

1998

  • K. YOSHIMI, M.H. YOO and S. HANADA: "Slip band propagation and slip vector transition in B2 FeAl single crystals", Acta Materialia, 46(16) (1998), 5769-5776.
    (DOI: 10.1016/S1359-6454(98)00228-6)
  • K. Yoshimi, Y. Saeki, M.H. Yoo, S. Hanada: "Room temperature tensile properties of Fe-Al single crystals strengthened by excess vacancies", Materials Science and Engineering A, 258(1-2) (1998), 75-83.
    (DOI: 10.1016/S0921-5093(98)00920-4)
  • Hideki Hosoda, Kyosuke Yoshimi, Kanryu Inoue, Shuji Hanada: "Effect of wet environment on hardness and yield stress of B2 Fe-Al alloys", Materials Science and Engineering A, 258(1-2) (1998), 135-145.
    (DOI: 10.1016/S0921-5093(98)00926-5)
  • K. Yoshimi, M.H. Yoo and S. Hanada: "Room-temperature serrated-flow behavior in Fe-rich FeAl under vacancy supersaturation", Interstitial and Substitutional Solute Effects in Intermetallics, Ed.by I. Baker, Ronald D. Noebe, Easo P. George, Metals & Materials Society (TMS), Warrendale, PA, (1998), 39-49.
    (DOI: 10.2172/676874)

1997

  • Kyosuke Yoshimi and Shuji Hanada: "The Strength Properties of Iron Aluminides", JOM, 49(8) (1997), 46-49.
    (DOI: 10.1007/BF02914403)
  • K. Yoshimi, S. Hanada and M.H. Yoo: "Yield stress anomaly in B2 FeAl", High-Temperature Ordered Intermetallic Alloys VII (MRS SYMPOSIUM PROCEEDINGS 1996), Ed.by C.C. Koch, C.T. Liu, N.S. Stoloff, A. Wanner, Materials Research Society (MRS), Pittsburgh, PA, 460 (1997), 313-324.
    (DOI: 10.1557/PROC-460-313)
  • N. Nomura, K. Yoshimi and S. Hanada: "Microstructure and creep Resistance of Nb3 Al/Nb In-situ Composites", Proceedings of the Second International Symposium on Structured Intermetallics (structural Intermetallics 1997), Ed.by M.V. Mathal, R. Darolia, C. T.Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi, The Minerals, Metals & Materials Society (TMS), Warrendale, PA, (1997), 923-928.

1996

  • K. Yoshimi, S. Hanada & M.H. Yoo: "Tensile properties of B2-type Fe-39mol%Al single crystals at elevated temperatures", Intermetallics, 4(2) (1996), 159-168.
    (DOI: 10.1016/0966-9795(95)00032-1)
  • KYOSUKE YOSHIMI, SHUJI HANADA, TSUYOSHI ONUMA, MAN H. YOO: "Transmission electron microscopic observation of thermally introduced planar faults in Fe-35 mol.%Al alloys", PHILOSOPHICAL MAGAZINE A, 73(2) (1996), 443-456.
    (DOI: 10.1080/01418619608244393)
  • 野村直之, 吉見享祐, 花田修治, 田原竜夫, 木村久道, 井上明久: "回転電極法を用いたNb3Al基合金の作製と組織制御", 粉体および粉末冶金, 43(2) (1996), 256-261.
    Naoyuki Nomura, Kyousuke Yoshimi, Shuji Hanada, Tatsuo Tabaru, Hisamichi Kimura and Akihisa Inoue: "Fabrication and microstructure controlling of Nb3Al based alloy by rotating electrode process", Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 43(2) (1996), 256-261.
    (DOI: 10.2497/jjspm.43.256)
  • K. Yoshimi, S. Hanada & M.H. Yoo: "On lattice defects and strength anomaly of B2-type FeAl", Intermetallics, 4(1) (1996), S159-S169.
    (DOI: 10.1016/0966-9795(96)80194-4)

1995

  • K. Yoshimi, H. Terashima, S. Hanada: "Effect of APB type on tensile properties of Cr added Fe3Al with D03 structure", Materials Science and Engineering A, 194(1) (1995), 53-61.
    (DOI: 10.1016/0921-5093(94)09659-7)
  • K. YOSHIMI, S. HANADA and M.H. YOO: "YIELDING AND PLASTIC FLOW BEHAVIOR OF B2-TYPE Fe-39.5 mol.%Al SINGLE CRYSTALS IN COMPRESSION", Acta Metallurgica et Materialia, 43(11) (1995), 4141-4151.
    (DOI: 10.1016/0956-7151(95)00098-G)

1994

  • K. Yoshimi, S. Hanada and H. Tokuno: "Effect of Frozen-in Vacancies on Hardness and Tensile Properties of Polycrystalline B2 FeAl", Materials Transactions, JIM, 35(1) (1994), 51-57.
    (DOI: 10.2320/matertrans1989.35.51)

1993

  • K. Yoshimi and S. Hamada: "Positive temperature dependence of yield stress in B2 FeAl", Structural Intermetallics, Ed.by R. Darolia, J. J. Lweandowski, C.T. Liu, The Minerals, Metals & Materials Society (TMS), Warrendale, PA, (1993), 475-482.

1991

  • K. YOSHIMI, S. ISHIYAMA, S. HANADA AND Y. MURAYAMA: "Measurement of Recrystallization Texture in H.C.P. Structures by the Selected Area Channeling Pattern Method", physica status solidi (a), 124(1) (1991), 81-94.
    (DOI: 10.1002/pssa.2211240106)

1990

  • 吉見享祐, 村山洋之介, 花田修治, 石山成志 : "純チタン再結晶材における集合組織と粒界性格分布との関連性", 日本金属学会誌, 54(9) (1990), 962-969.
    Kyosuke Yoshimi, Yonosuke Murayama, Shuji Hanada and Seishi Ishiyama: "Relationship between texture and grain boundary character distribution in recrystallized pure titanium", Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 54(9) (1990), 962-969.
    (DOI: 10.2320/jinstmet1952.54.9_962)
  • W.J. Kang, and K.Yoshimi, S. Hanada, S. Saito, Y. Murayama, and S. Hayashi, A. Nagata: "Analysis of orientation distribution in YBa2Cu3O7-x polycrystals by electron channeling patterns", Journal of Applied Physics, 68(12) (1990), 6341-6346.
    (DOI: 10.1063/1.346879)

1989

  • TADAO WATANABE, KEN-ICHI ARAI, KYOSUKE YOSHIMI and HIROSHI OIKAWA: "Texture and grain boundary character distribution (GBCD) in rapidly solidified and annealed Fe-6∙5mass%Si ribbons", PHILOSOPHICAL MAGAZINE LETTERS, 59(2) (1989), 47-52.
    (DOI: 10.1080/09500838908214776)

Page Top